forestry Posted September 30, 2013 Report Share Posted September 30, 2013 I have recently bought a Browning 725 sporter and have on several occasions fired before I was ready when shooting clays, is there anyway of making the trigger less sensitive. I have never had this happen on any of my previous guns. Quote Link to comment Share on other sites More sharing options...
Harnser Posted September 30, 2013 Report Share Posted September 30, 2013 (edited) If its a new gun or a used one bought from a dealer take it straight back ,its dangerous . Sounds like worn sears . If you bought it privately ,still take it to a competent gun smith . You can check the trigger weight by using a spring balance . I like my triggers on a shot gun at around 5 pounds . Harnser. Edited September 30, 2013 by Harnser Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted September 30, 2013 Report Share Posted September 30, 2013 Was your finger on the trigger when the gun went off, or did it just go off on it's own. A big difference there. Quote Link to comment Share on other sites More sharing options...
Gunman Posted September 30, 2013 Report Share Posted September 30, 2013 Setting pull weights is not a job to be taken lightly . It is easy to get it wrong resulting in the need for new sears . As these guns have only been around for a year it may be that a few teething problems will show up . Strongly recommend that it goes back to the shop for them to have corrected under warrantee . Quote Link to comment Share on other sites More sharing options...
forestry Posted September 30, 2013 Author Report Share Posted September 30, 2013 It is a new gun and finger was on the trigger, will take to a gunsmith and have it checked out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.