digger Posted January 14, 2007 Report Share Posted January 14, 2007 do any of the major manufacturers make a decent shell in 16 bore for clay shooting ? i like taking the sbs on a clay round but using the same carts as i use when decoying is heavy on the pocket and the shoulder Quote Link to comment Share on other sites More sharing options...
dodeer Posted January 14, 2007 Report Share Posted January 14, 2007 Express do a 25g fibre load in 7's for about £155 per 1000. RC also do a 28g plastic load in 7's and cost about the same. Quote Link to comment Share on other sites More sharing options...
digger Posted January 14, 2007 Author Report Share Posted January 14, 2007 thanks for that sam,my local gunshop was totally chocolate kettle Quote Link to comment Share on other sites More sharing options...
ellepop Posted January 24, 2007 Report Share Posted January 24, 2007 i've tried everything from eley vip's to saga's and rottweil's. can't see the point in paying a fortune just to break clays so buy in bulk from just cartridges when passing. they do saga's in 7 shot 28g load (plastic) for about £120 per thou, and they are as good as anything else i ve used Quote Link to comment Share on other sites More sharing options...
Badgerbaiter Posted July 14, 2007 Report Share Posted July 14, 2007 ive tried all sorts on clays, express 26g ok, three crowns 26g ok + HV 28g bit fierce in a light gun, rotweill 28g (good in 6.5's) saga 28g cheap, bit dirty and loud rc16's good eley vip v.good three crown paper case 26g....... the best cartridge i've ever used but only come in 6's and they are £200 a thou!!! Quote Link to comment Share on other sites More sharing options...
Floating Chamber Posted July 14, 2007 Report Share Posted July 14, 2007 Mine! 18grains A1 powder, Cx2000 primer B&P wad and 7/8 oz No. 7 Cost? £72/1000 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.