rabbiter Posted May 20, 2014 Report Share Posted May 20, 2014 a farmer friend needed a stock for his .22lr cz 452 style,so I took one up to him today,he was showing me a couple of old guns he has,and one of them,stamped jga caught my eye,after googling,I found its an Anschutz,but his doesn't have a bolt,as his nephew somehow lost it,any body know where he could get one? any help would be great..........DAZ http://www.angelfire.com/mi/rpsco/jga.html Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 20, 2014 Report Share Posted May 20, 2014 contact a load of dealers to see if there is one lying around from a scrapped gun somewhere You could have one made. Quote Link to comment Share on other sites More sharing options...
rabbiter Posted May 20, 2014 Author Report Share Posted May 20, 2014 good idea mate,thanks,don't think I could make one though.. Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 20, 2014 Report Share Posted May 20, 2014 (edited) simple enough for a riflesmith to do. or a good mechanical engineer/toolmaker. Check its not available here though first http://jga.anschuetz-sport.com/index.php5?menu=226&sprache=1 Edited May 20, 2014 by HDAV Quote Link to comment Share on other sites More sharing options...
rabbiter Posted May 20, 2014 Author Report Share Posted May 20, 2014 thanks mate,already looked there,no luck Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 20, 2014 Report Share Posted May 20, 2014 The 9mm flobert may be same design and easily adapted/machined to fit email the serial and some photos to anschutz they are the best first port of call Quote Link to comment Share on other sites More sharing options...
rabbiter Posted May 20, 2014 Author Report Share Posted May 20, 2014 thanks again mate,ill try that... Quote Link to comment Share on other sites More sharing options...
Harnser Posted May 21, 2014 Report Share Posted May 21, 2014 contact a load of dealers to see if there is one lying around from a scrapped gun somewhere You could have one made. Wouldn't you need a pattern to have one made ? Harnser Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 21, 2014 Report Share Posted May 21, 2014 Wouldn't you need a pattern to have one made ? Harnser Would make it easier but I am sure someone well versed in auctioning rifles could manage it given enough time would it require reproofing ? Quote Link to comment Share on other sites More sharing options...
kent Posted May 23, 2014 Report Share Posted May 23, 2014 Making a bolt for a rifle will be to costly to contemplate IMO. I take it you don't mean an action screw? I recon you could likely buy a whole new rifle for less Quote Link to comment Share on other sites More sharing options...
rabbiter Posted May 27, 2014 Author Report Share Posted May 27, 2014 been on to ruag ammotec,who have been on to anshutz for me,looking good so far,they do have one available,just waiting for confirmation,thanks for input guys....DAZ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.