crossy 666 Posted June 15, 2014 Report Share Posted June 15, 2014 (edited) Hi, Can I ask if any one out there who has got or had a ASE UTRA S series mod ever got it apart please ? Edited June 15, 2014 by crossy 666 Quote Link to comment Share on other sites More sharing options...
mick miller Posted June 15, 2014 Report Share Posted June 15, 2014 Is this the little dinky one for the 22lr and hmr? If so, take the end cap off and then use a liberal amount of saintly patience to tap the washers out. Allow yourself a month for reassembly. Quote Link to comment Share on other sites More sharing options...
saddler Posted June 15, 2014 Report Share Posted June 15, 2014 I thought they were all sealed units? Quote Link to comment Share on other sites More sharing options...
crossy 666 Posted June 15, 2014 Author Report Share Posted June 15, 2014 Is this the little dinky one for the 22lr and hmr? If so, take the end cap off and then use a liberal amount of saintly patience to tap the washers out. Allow yourself a month for reassembly. No mate it's the one that looks like a big can of beans on the end of your rifle lol. I brought a new rifle this weekend and the thread is different and I want to no if the nut can be removed with out wrecking the mod ? Quote Link to comment Share on other sites More sharing options...
saddler Posted June 15, 2014 Report Share Posted June 15, 2014 Jackson Rifles will do the bushing swap, about £40 inc return P&P Quote Link to comment Share on other sites More sharing options...
crossy 666 Posted June 15, 2014 Author Report Share Posted June 15, 2014 (edited) Jackson Rifles will do the bushing swap, about £40 inc return P&P Top man, I will give them a call save posting the mod and get a bush thanks. Now all I have to do is to work how to get the old one out lol Edited June 15, 2014 by crossy 666 Quote Link to comment Share on other sites More sharing options...
saddler Posted June 15, 2014 Report Share Posted June 15, 2014 Jackson Rifles will do the bushing swap, about £40 inc return P&P Top man, I will give them a call save posting the mod and get a bush thanks. Now all I have to do is to work how to get the old one out lol Or NOT I tried this method...they only do the work in-house! You must send them the mod. Pity, as otherwise I'd have several bushings to suit different rifle threads Another option may be to look into different thread adapters...these will work out cheaper IF you know the thread the mod is at present, etc. Quote Link to comment Share on other sites More sharing options...
crossy 666 Posted June 15, 2014 Author Report Share Posted June 15, 2014 Or NOT I tried this method...they only do the work in-house! You must send them the mod. Pity, as otherwise I'd have several bushings to suit different rifle threads Another option may be to look into different thread adapters...these will work out cheaper IF you know the thread the mod is at present, etc. I could prob work it out as it is of my Tikka T3 Vermint and I want it to go on my Tikka T3 light both we're screw cut from the factory Quote Link to comment Share on other sites More sharing options...
saddler Posted June 15, 2014 Report Share Posted June 15, 2014 It's sometimes handy if you have a few mates nearby with similar threads...though you can sometimes get a close guess using a digital caliper for the o.d. then try to measure the thread pitch/count Hope you get sorted Quote Link to comment Share on other sites More sharing options...
crossy 666 Posted June 15, 2014 Author Report Share Posted June 15, 2014 The Vermint is - M18x1 The light is M14x1 Would you no we're I would get a bush from please ? Quote Link to comment Share on other sites More sharing options...
saddler Posted June 15, 2014 Report Share Posted June 15, 2014 Will have a look, but it may be a case of calling in a favour of a good machinist (if you know any) with access to a lathe. I know of a USA firm that specialises in such things, but by the time you've added the shipping/duty it'd be cheaper just going to Jackson Rifles... Quote Link to comment Share on other sites More sharing options...
crossy 666 Posted June 15, 2014 Author Report Share Posted June 15, 2014 Will have a look, but it may be a case of calling in a favour of a good machinist (if you know any) with access to a lathe. I know of a USA firm that specialises in such things, but by the time you've added the shipping/duty it'd be cheaper just going to Jackson Rifles... Thank you for all your help. I will go see a man I no in the morning. Thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.