NickB65 Posted February 27, 2015 Report Share Posted February 27, 2015 Does anyone know the size of the Armsan A612 gun stock screws that attach the gun stock end to the stock? The guys at work milled me a 1" extension piece that the existing one fits into and they have done a cracking job but have lost the screws !!! The end piece the gun came with has a routered edge which helps it sit in the stock - the guys replicated this on the extension piece so the existing stock end sits into the new extension piece and the extension piece has the routered edge to help it sit in the stock..... lovely piece of work ..... shame they lost the screws..... I could go down the hardware store and find one that fits but it would be nice to know what the original was. Quote Link to comment Share on other sites More sharing options...
Luckyshot Posted February 27, 2015 Report Share Posted February 27, 2015 If you havent got a reply by tomorow (at work atm) Ile take mine off and measure it for you. Quote Link to comment Share on other sites More sharing options...
figgy Posted February 27, 2015 Report Share Posted February 27, 2015 Would the original screws still be long enough after adding an inch to the length they are holding? Quote Link to comment Share on other sites More sharing options...
NickB65 Posted February 27, 2015 Author Report Share Posted February 27, 2015 Would the original screws still be long enough after adding an inch to the length they are holding? the extension was designed so I could take it off when the wife uses the gun hence the need for the old screw measurements :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.