ratter 1 Posted January 5, 2016 Report Share Posted January 5, 2016 Does anybody know were I can get a lamp bracket to fit a fully moderated 41o the barrel is 38 mm wide all I can find is ones to fit a scope cheers Quote Link to comment Share on other sites More sharing options...
tigger got stichs Posted January 6, 2016 Report Share Posted January 6, 2016 go on flea bay search pipe clamps I got my ones on there for me 12g if not make some from the metal banding you get from builders merchants that straps the house bricks on the pallets Quote Link to comment Share on other sites More sharing options...
crossover Posted January 20, 2016 Report Share Posted January 20, 2016 You could try cable ties Quote Link to comment Share on other sites More sharing options...
mick miller Posted January 20, 2016 Report Share Posted January 20, 2016 (edited) I could probably design and print you one if you get stuck, two m3's to hold the torch semi-permanently in the clamp and then a single m5 and thumbscrew so you can slide the torch and bracket on and off. It'd be about £12 plus postage, and although pretty tough (I've yet to break any of my printed torches, nv add-ons or dsa's, you can't go knocking in fence posts with any 3D printed item. As long as you didn't drop it onto a concrete or tiled floor it should be fine though. Edited January 20, 2016 by mick miller Quote Link to comment Share on other sites More sharing options...
mick miller Posted January 21, 2016 Report Share Posted January 21, 2016 Have a look at this thread: http://forums.pigeonwatch.co.uk/forums/topic/324024-introducing-the-lightmaster/ The torch grip would be similar to that, then another clamp to hold the moderator. That thing is plenty strong enough to hold the torch and get thrown around in the truck. Quote Link to comment Share on other sites More sharing options...
littlerob Posted January 21, 2016 Report Share Posted January 21, 2016 Just get the universal rubber block one that holds on with a velcro tape it's all I use on my hust hushpower Quote Link to comment Share on other sites More sharing options...
mick miller Posted January 21, 2016 Report Share Posted January 21, 2016 I might have one of those too! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.