hatsanmad Posted October 1, 2016 Report Share Posted October 1, 2016 Hi guys im out for my first flight of the season tomorow. And instead of dipping into my stock of alliant steel i want to use the ssb150 i have first. So has anyone loaded and used ssb150 in a 2 3/4 hull for a 32 gram steel load plan on using number 4s for some teal and wigeon. Regards hatsan Quote Link to comment Share on other sites More sharing options...
tomaddy525 Posted October 1, 2016 Report Share Posted October 1, 2016 Theres a clay and game load for a 3" hull if that is any use? Quote Link to comment Share on other sites More sharing options...
wigeon jim Posted October 1, 2016 Report Share Posted October 1, 2016 You will need a 3" case to get 32g of steel shot with SSB 150 powder, or a 70mm with a RTO. Jim. Quote Link to comment Share on other sites More sharing options...
hatsanmad Posted October 2, 2016 Author Report Share Posted October 2, 2016 Ok thanks for that jim. I have the c and g sheets now and looking at it i see they used a a rto on there 70mm load. Quote Link to comment Share on other sites More sharing options...
TONY R Posted October 2, 2016 Report Share Posted October 2, 2016 Ok thanks for that jim. I have the c and g sheets now and looking at it i see they used a a rto on there 70mm load. RTO with frangible disks are quite good, you could look at using a short 10z or 24 gram wad and may be get a 30 gram load in if smallish shot like 4s for ducks, even if the shots a couple of mm over the top of the wad, set back prevents any scratches in the barrel if you just have a little bit over the top. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.