HDAV Posted January 8, 2017 Report Share Posted January 8, 2017 (edited) Does anyone know if the stock from a 90's 3800 (short tang) will swap straight onto a MK38 and vice versa? Also same for forend wood? Edited January 8, 2017 by HDAV Quote Link to comment Share on other sites More sharing options...
sishyplops Posted January 8, 2017 Report Share Posted January 8, 2017 Yes it will all browning 325, 425, and 525 will also as long as they are short tang, miroku tend to be a little lower in the comb and the mk38 stock is a little fatter Quote Link to comment Share on other sites More sharing options...
sishyplops Posted January 8, 2017 Report Share Posted January 8, 2017 The only forend difference is tha early guns had an external receiver nut i.e. Put in from the outside of the forend all later guns fitted from the inside, outside fit ones can be made to fit just need longer screw Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted January 8, 2017 Report Share Posted January 8, 2017 They both should however a perfect fit to the heading is not always the case due to tolerances. Forend wise the pin nearest the action may be different depending on the era. Quote Link to comment Share on other sites More sharing options...
HDAV Posted January 8, 2017 Author Report Share Posted January 8, 2017 (edited) Yes it will all browning 325, 425, and 525 will also as long as they are short tang, miroku tend to be a little lower in the comb and the mk38 stock is a little fatterOk interesting I will try my 3800 stock on my 525 in that case if the rear of the actions is the same and the stock bolt goes through I should be good. 93 inv+ barrelled 3800 06 inv barrelled 525 Edited January 8, 2017 by HDAV Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.