Blackandgold Posted January 26, 2018 Report Share Posted January 26, 2018 Has anyone else fitted on of these ? The first 5 inches there is no baffles in the moderator my question is how far down the barrel should I put the compression fitting ? At the minute I've done it just about flush ..... Quote Link to comment Share on other sites More sharing options...
Guest Posted January 26, 2018 Report Share Posted January 26, 2018 (edited) That should be lower down about a inch from end of the barrel .the first 5inc has no baffles then screw the moderator on the baffles are about 5inch from the end of the barrel . i have the same on a baikal 410 .do you have any instructions http://www.saddleryandgunroom.co.uk/hushpower.htm try this site for instructions Edited January 26, 2018 by Guest Quote Link to comment Share on other sites More sharing options...
walshie Posted January 26, 2018 Report Share Posted January 26, 2018 As above, I left about 1" to 1 1/2" sticking out of the end of the bushing on my 410. Quote Link to comment Share on other sites More sharing options...
Blackandgold Posted January 26, 2018 Author Report Share Posted January 26, 2018 Thanks guys how do you fond yours I've had mixed feedback Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted January 26, 2018 Report Share Posted January 26, 2018 (edited) If you have brass bead .screw it back in .after you have fitted the mod .mine sits about 1/2 inch from the muzzle.. The biggest issue is stopping the thing from slowly moving forward after a few shots .be very very sure to check its not slipping after each shot at first . I had to get some serious plumbing grips on mine before it stopped slipping Ps I find mine very effective. Edited January 26, 2018 by Ultrastu Quote Link to comment Share on other sites More sharing options...
Guest Posted January 26, 2018 Report Share Posted January 26, 2018 I use eley extra long 18gram -6shot fibre wad ,, it just sounds like a air rifle. Don’t use plastic wads they get stuck in moderator Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted January 27, 2018 Report Share Posted January 27, 2018 No they don't . Quote Link to comment Share on other sites More sharing options...
Guest Posted January 27, 2018 Report Share Posted January 27, 2018 If you phone hushpower they tell you to use fibre .when I spoke to them for advise in fitting the moderator they told me to use fibre Quote Link to comment Share on other sites More sharing options...
walshie Posted January 27, 2018 Report Share Posted January 27, 2018 If that's what they say then fair enough but I haven't had any plastic wads stuck either. Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted January 27, 2018 Report Share Posted January 27, 2018 The newer design mod is supposed to stop that issue . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.