Eaf70 Posted October 21, 2019 Report Share Posted October 21, 2019 Hi, Just a quick request, but does anybody know how to remove the ejectors from a Barasingha 220 ? Picked one up at the weekend and could do with knowing how to get them out to give them a once over . Many thanks Quote Link to comment Share on other sites More sharing options...
Gunman Posted October 21, 2019 Report Share Posted October 21, 2019 Dont know but a photo of the barrel side showing the ejectors will help . There are only a couple of methods used by the continentals so it will be one or the other ,but I can not bring to mind this gun . Sort of thing a gunsmiths don't think about ,we tend just to look and do , trying to remember every gun we have seen and how each gun is built is not a thing I have done . You just remember the odd or difficult ones .Even then its not always easy to explain . Quote Link to comment Share on other sites More sharing options...
Eaf70 Posted October 21, 2019 Author Report Share Posted October 21, 2019 (edited) Thanks, I'll take a pic this evening and post it up tomorrow, hopefully it may jog somebody's memory. I've tried pushing and twisting etc but I don't seem to be getting anywhere and nothing seems to jump out as the obvious thing to do 😂😂 Edited October 21, 2019 by Eaf70 Quote Link to comment Share on other sites More sharing options...
old'un Posted October 21, 2019 Report Share Posted October 21, 2019 (edited) Does it look anything like this video? Edited October 21, 2019 by old'un Quote Link to comment Share on other sites More sharing options...
Eaf70 Posted October 21, 2019 Author Report Share Posted October 21, 2019 Hopefully the pictures will come through that I took of them Thanks old’un I used to own a Beretta and that was the first thing I tried, but there’s nowhere for it too twist out 🤔🤔 Quote Link to comment Share on other sites More sharing options...
old'un Posted October 21, 2019 Report Share Posted October 21, 2019 (edited) Not hundred % but the small lug might be what’s holding the ejector in place, the ejectors do not look under spring pressure but if they are try compressing the ejector till its flush with the breech then see if the small lug slides/taps forward toward the muzzle. If it does move forward, take it out, then the ejectors should slide out, if they are under pressure gently release the pressure on the ejector. Edited October 21, 2019 by old'un Quote Link to comment Share on other sites More sharing options...
Gunman Posted October 21, 2019 Report Share Posted October 21, 2019 Hold the barrels sideways on in a well padded vice .Push the extractors home with a piece of wood . The small lug will slide forwards and lift up to be removed.Release the pressure on the extractors and let them come out slowly. Be very careful when doing this as they can come out fast and hurt your fingers .DO NOT attempt to remove them hand holding . Quote Link to comment Share on other sites More sharing options...
Eaf70 Posted October 22, 2019 Author Report Share Posted October 22, 2019 Thanks guys, will take it into work next week after I've tried it out at the weekend. Quote Link to comment Share on other sites More sharing options...
Eaf70 Posted October 22, 2019 Author Report Share Posted October 22, 2019 Thank you Gunman and Old’un you both got it spot on 👍👍 much appreciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.