ghilley Posted January 5, 2020 Report Share Posted January 5, 2020 Anyone got or know where I can get the parts needed as my loader is a single primer unit but has all the tappings to fit a auto primer thanks also looking for a primer tube for a 366 cheers Quote Link to comment Share on other sites More sharing options...
roughshooter Posted January 6, 2020 Report Share Posted January 6, 2020 I have various bits for the primer feed. If it is just the primer filler then that is no problem. Do you also need the bit that goes into the threaded top piece? I have one of those but it needs a new release bit on the bottom. I have quite a few bits as I run the pacific loaders in 155 and 266 myself Quote Link to comment Share on other sites More sharing options...
ghilley Posted January 6, 2020 Author Report Share Posted January 6, 2020 Fab I have nothing my 155 has two taped holes by the primer seat this takes the lever that you flip across dropping the primer in the seat the tube and mag go threw a threaded hole on the top my machine is just a hand primed one so I’m looking to convert it just to speed things up I’m pretty good at fabrication so I can adapt parts Very interested thanks 07921280925 Adam (ghilley) Quote Link to comment Share on other sites More sharing options...
roughshooter Posted January 6, 2020 Report Share Posted January 6, 2020 Adam, if you are good at fabrication then you maybe could borrow some of the parts off one of my machines and replicate them. I have some of the parts loose but the rest will be on a 155. I am not too far away from you. i will have a look through my box of parts and give you a shout tomorrow evening graham Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.