oldypigeonpopper Posted May 3, 2020 Report Share Posted May 3, 2020 hello, Still wanted as above, or can anyone give an idea how i can sort the POI, cheers Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 3, 2020 Report Share Posted May 3, 2020 Hi if its 11mm scope rail ant supplies sell a one piece mount thats adjustable for hight and windage Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 3, 2020 Author Report Share Posted May 3, 2020 43 minutes ago, scarecrow243 said: Hi if its 11mm scope rail ant supplies sell a one piece mount thats adjustable for hight and windage hello, thanks have looked at those before and they were tried on a friends 455 but did not work right, its the 2 mount ATP 66 that most are using, i did try and shim some standard mounts but that did not work, i need to get more height and right at POI at 50 yards, the XT is known for this problem, saying that i might just sell and buy a Pard 007 but thought see if i could get some mounts before the winter, cheers Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 4, 2020 Report Share Posted May 4, 2020 i had an xt on my brno 2 i just used sportsmatch high mounts the cross hair was lower than center on the screen that was set for 75 yards Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 4, 2020 Author Report Share Posted May 4, 2020 21 minutes ago, scarecrow243 said: i had an xt on my brno 2 i just used sportsmatch high mounts the cross hair was lower than center on the screen that was set for 75 yards hello, i have these mounts on the XT already, i only zero to 50 yards with the 455, i might try again after lock down, reverse the mounts and shim front might help, would still like to find some adjustable mounts Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 4, 2020 Report Share Posted May 4, 2020 Hi if you shim the front mount it will be worse you have to shim the rear mount for my brno mod 2 with 15mm dovetail groves i bought the 15mm dovetail too 11mm dovetail converter blocks and the adjustable i piece mount for my rt i havent shot it yet but bore sighting at 80 yards the cross hairs are just above the target scope settings at zero hope this helps Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 4, 2020 Author Report Share Posted May 4, 2020 1 minute ago, scarecrow243 said: Hi if you shim the front mount it will be worse you have to shim the rear mount for my brno mod 2 with 15mm dovetail groves i bought the 15mm dovetail too 11mm dovetail converter blocks and the adjustable i piece mount for my rt i havent shot it yet but bore sighting at 80 yards the cross hairs are just above the target scope settings at zero hope this helps hello, i did try shimming a few ways but it would not go above 1 inch below centre target at 50 yards, i think when i can will give another try and reverse mounts and take it from there, cheers Link to comment Share on other sites More sharing options...
Recommended Posts