tikkamark Posted September 9, 2007 Report Share Posted September 9, 2007 The motor out of my pigeon magnet is working ok but there is a plastic cog connected to the shaft that drives the arms this is worn fairly bad has anyone a motor like this or does anyone know where i could buy a new motor like this there is a sticker on the back of the motor saying Type:zyt6035st-1 Volts:dc 12v Amps:0.7 Rpm:50rpm Any help would be most welcome :unsure: Quote Link to comment Share on other sites More sharing options...
tikkamark Posted September 9, 2007 Author Report Share Posted September 9, 2007 Landrover whiper moter go to your local 4x4 breaker Is it definitly a land rover wiper motor?I will try the local breakers thanks winchester :unsure: Quote Link to comment Share on other sites More sharing options...
taffygun Posted September 10, 2007 Report Share Posted September 10, 2007 Any wiper motor would do the job, just make sure you connect the relevant wire to the slower of the wiper speeds and not the intermittent :unsure: Quote Link to comment Share on other sites More sharing options...
strudwick Posted November 28, 2007 Report Share Posted November 28, 2007 hi i made my one out of a wiper moter that look the same .... have a look in a scrap yard Quote Link to comment Share on other sites More sharing options...
jonno 357 Posted November 28, 2007 Report Share Posted November 28, 2007 Landrover whiper moter go to your local 4x4 breaker Is it definitly a land rover wiper motor?I will try the local breakers thanks winchester Its made by AC Delco. Bog standard three bolt assembly Jonno Quote Link to comment Share on other sites More sharing options...
Guest The Outlaw Posted November 30, 2007 Report Share Posted November 30, 2007 Any wiper motor would do the job, just make sure you connect the relevant wire to the slower of the wiper speeds and not the intermittent The intermitant is great for the magnet if there is only a light drizzle of woodies. The old Austin 1100 and Allegro ones are good as well because of thier slightly slower speed therefore making the mag look realistic. Tony Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.