bigboodydaddy Posted August 8, 2021 Report Share Posted August 8, 2021 Any one have a atn x sight 4k pro 5x20 day and night scope in the south Yorkshire area that can help me to set up the ballistic calculator so the point of impact moves itself in the scope with a touch of the button I'm using jsb exact 15.89gn pellets cant seem to set it up correctly any help would be greatly appreciated. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted August 8, 2021 Report Share Posted August 8, 2021 Hi you need the extra range finder to make it adjust its self if you do not have it you have too put the range in manually if its not your zero distance videos on you tube will show you what i am saying Quote Link to comment Share on other sites More sharing options...
Rewulf Posted August 8, 2021 Report Share Posted August 8, 2021 As scarecrow says, without the ABL that feature won't work how you think. The stadiometric rangefinder that's built in, takes measurements, but the accuracy cannot be relied on. £300 extra for the ABL... Which I will say, works perfectly. Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 8, 2021 Author Report Share Posted August 8, 2021 I Have the ABL 1500 attached to the scope the scope is on an fx impact .22 the abl has paired up ok Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted August 8, 2021 Report Share Posted August 8, 2021 have you set the ballistic settings this needs done also you would be better to watch the setup videos Quote Link to comment Share on other sites More sharing options...
Rewulf Posted August 8, 2021 Report Share Posted August 8, 2021 Scope height , pellet velocity and BC are critical when you put the information in , do you have access to a chrono? Manufacturers often claim higher BCs for pellets, so consider that to be adjustable, but you need a starting point. Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 8, 2021 Author Report Share Posted August 8, 2021 Yes chronoed at 598 fps bc = 0.031 pellet weight 15.89 gr section density 0.047 form factor 1.5 put relevant information in still keep getting target unreachable going to try factory reset tomorrow Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted August 8, 2021 Report Share Posted August 8, 2021 i would not do a factory reset try to update the firm ware first as if its not been updated before you will wipe it clean ie crash Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 8, 2021 Author Report Share Posted August 8, 2021 Thanks for the heads up buddy will try that. Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 9, 2021 Author Report Share Posted August 9, 2021 (edited) Scarecrow243 my firmware was 3.1.08 451 downloaded the new update and it seems to be ok now the poi moves as it should now will try shooting the rifle at the weekend to see if it works well with the ballistic date i entered the new software update has changed to 3.1.11483. Thanks Edited August 9, 2021 by bigboodydaddy Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted August 9, 2021 Report Share Posted August 9, 2021 glad to hear it helped you i am getting my new one tomorrow 3x14 pro Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 9, 2021 Author Report Share Posted August 9, 2021 nice I'm getting another 5x20 for my .223 and taking off the drone pro 5x10 Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted August 9, 2021 Report Share Posted August 9, 2021 i looked at the 5x20 but after watching a few videos the field of view was not good at 50 yards or closer so i went for the 3x14 as i will use it on air rifle .22lr .243 Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 10, 2021 Author Report Share Posted August 10, 2021 Nice one buddy thanks for your help it is appreciated. ATB Denis Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted August 10, 2021 Report Share Posted August 10, 2021 Hi Denis glad to help anyone if i can cheers Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted August 11, 2021 Author Report Share Posted August 11, 2021 I'm the same fella i would never run a successful business I'm always doing jobs for nowt 🙂 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.