crowstopper Posted May 14, 2004 Report Share Posted May 14, 2004 I have had a crossman lazer for quite a while and was wondering if you could get a mount for a barrel of a 22 airgun. I know they do a plastic one which goes on the top of a scope but that is not good as every time I take it in and out of the slip it screws up and I have to re zero it. So does any one know where I can get a mount that fits on the barrel for a crosman lazer. Also while I am asking questions here’s another for anyone who can help, does anyone know where you can get good quality sheath knives from of the net. Crowstoper :yp: Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 14, 2004 Author Report Share Posted May 14, 2004 Thought of another question while I am at it, has anyone ever put a gas ram in a BSA lighting and are they better or worse. I have been told they are more accurate. crowstopper :yp: Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 15, 2004 Author Report Share Posted May 15, 2004 anyone??? :yp: Quote Link to comment Share on other sites More sharing options...
Aled_cky Posted May 15, 2004 Report Share Posted May 15, 2004 look in airgunner magazine, page15ish.. shop name 'Target Sports' telephone number 0870 060 7331 and ask for a Laser Scope Adaptor £10.99.. it comes free with the laser if you buy the laser. but £10.99 for the mount Aled Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 15, 2004 Author Report Share Posted May 15, 2004 thanks Aled :yp: Quote Link to comment Share on other sites More sharing options...
maluk Posted May 16, 2004 Report Share Posted May 16, 2004 Thought of another question while I am at it, has anyone ever put a gas ram in a BSA lighting and are they better or worse. I have been told they are more accurate. crowstopper :yp: I'd also like to know this...... Quote Link to comment Share on other sites More sharing options...
bennyblanco Posted May 17, 2004 Report Share Posted May 17, 2004 hi mate. you need to measure your barrel, beamshot mounts are much better than the crossman ****, they are ally with a protective cover inside. if your barrel is between 12-16mm mail me. gas rams are brilliant, there is still alot of recoil but its sharper and more predictable, make sure you put the right caliber in though. 25 minute job to fit it in and your gun will be transformed. hope this helps. ps i know someone who gets them from the manufactuer that theoben gets them from so if you are near cambridge could get you a saving. Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 17, 2004 Author Report Share Posted May 17, 2004 mark do u know if the beamshot lazer mounts will fit on the crossman lazer, as different lazers have different diameters, have also found that the crossman lazer its self is very good the only bad thing is the mounts. it hold the beem together well but it is let down by the crappy mounts. crowstopper Quote Link to comment Share on other sites More sharing options...
bennyblanco Posted May 17, 2004 Report Share Posted May 17, 2004 as far as i know they are the same diameter, cant measure it now as someone is having her beauty sleep, and my girl friend is asleep in the same room :yp: Quote Link to comment Share on other sites More sharing options...
roblade Posted May 18, 2004 Report Share Posted May 18, 2004 hi there with regards to the BSA gasramed lighting. it turns them from a decent little gun into a VERY decent gun! having owned a standard lighting then given the chance ot have a go on a gas ram one i was amazed at the difference to shooting it that it made the reciol was a lot more managable and as a result the acuracy came down to almost 3/4" (thats three quaters!) at 35 yards! but in my oppinion there as well worth the spending out on. and of your going to do that you might want to look at getting a two stage trigger on as well :yp: in for a penny in for a pound the two stage unit off one of these bsa goldstar or superstar i know one of them fits, but have to check on which one. but you certainly wont be unhappy with the gas ram fitted! had i still got mine that would have had one by now hope this helps a little ROB Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 18, 2004 Author Report Share Posted May 18, 2004 Where can i get a gas ram of the internet ? :yp: Quote Link to comment Share on other sites More sharing options...
roblade Posted May 18, 2004 Report Share Posted May 18, 2004 you could always try getting them here, im not too sure if any one else does them, chambers may but im not too sure about this. theoben gas rams go to "accesories" then "gas struts" hope this helps a little ROB :yp: Quote Link to comment Share on other sites More sharing options...
bennyblanco Posted May 18, 2004 Report Share Posted May 18, 2004 lazer is between 20-21mm. gas ram is a must! Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 21, 2004 Author Report Share Posted May 21, 2004 thanks all, going Bunny bashing tonight my mate has a gas ram in his lighting and i hav a Spring, hope I get a few if not I may be forced to buy a gas ram very quickly. :yp: crowstopper Quote Link to comment Share on other sites More sharing options...
1 of 5 Posted May 24, 2004 Report Share Posted May 24, 2004 I wouldn't bother with a ram. AA don't use them and to all intents and purposes are the best recoiling guns about. Also Whiscomb don't use them either. A spring will last years with zero maintenance. A ram will not have the same service life. It will make no improvement to accuracy at all but will leave you poorer. Frankly it's a gimmick. Beamshot mounts are double clamp type so will adapt to a variety of laser sizes. Crosman mounts are a joke. Quote Link to comment Share on other sites More sharing options...
crowstopper Posted May 24, 2004 Author Report Share Posted May 24, 2004 1 of 5 in my last post on this subject I said I was going out bunny bashing with my mate and is lighting was much more accurate then my 1, I have had ago with his and it improves it no end, but that’s just what I have found,It is also no way near as much recoil crowstopper :( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.