Dave-G Posted December 17, 2024 Report Share Posted December 17, 2024 Ben Taylor And Son .22 cal FAC FX Cyclone Carbine in good order which I bought new - but where I needed it for is no longer available. It has three power level settings with the highest level being 26 ft lbs.Comes fitted with a 6x36 Weaver Classic that has a Dual x retical.Also supplied with a 3 litre 300 bar charging bottle in test till 07 2029, Combro and spare O-rings etc with a regulator service tool.The Weihrauch sound mod is on ticket and covered with hockey sticky tape to minimise twang.One of the lightest air rifles available with a slender walnut stock. The red tape on the sound mod was used for carrying the Combro.£500 face to face in Leicester, if I don't know the buyer he will have to satisfy me he has an FAC slot before arranging to meet. Quote Link to comment Share on other sites More sharing options...
Dave-G Posted December 29, 2024 Author Report Share Posted December 29, 2024 A mainly selling member on here seemingly didn't see the bipod not included photo and doesn't respond to replies to his PM's. So to be perfectly clear: THE BIPOD IS NOT INCLUDED. Quote Link to comment Share on other sites More sharing options...
24230 Posted December 29, 2024 Report Share Posted December 29, 2024 Hello i am away for a few days will contact you on my return thank you. Quote Link to comment Share on other sites More sharing options...
Dave-G Posted December 30, 2024 Author Report Share Posted December 30, 2024 23 hours ago, 24230 said: Hello i am away for a few days will contact you on my return thank you. Bless - it wasn't you I was referring to though. Quote Link to comment Share on other sites More sharing options...
Dave-G Posted December 30, 2024 Author Report Share Posted December 30, 2024 (edited) In the absence of a sale I'd consider swapping the bare rifle and high end scope for a lightweight 12 ft lb .177 PCP: without scope as a NV scope would likely be utilised with it in a barn. Scope needs to go with the rifle as I have several more to clear out. Whilst I have nowhere requiring an air rifle any more I can't pass mine down to my son because he doesn't have - nor wants the FAC rigmarole. Edited December 30, 2024 by Dave-G Added photo's Quote Link to comment Share on other sites More sharing options...
24230 Posted Wednesday at 10:04 Report Share Posted Wednesday at 10:04 Happy new year, I am back home now I have looked at your Fx I have a .22 and a HMR 17 I was going to apply for a slot on my Fac for a 20/30 lb air gun but it’s for Squirrels at our shoot, I am not at this time ready as I am putting the feeders in front of the big trees so I have back stop. I am not saying I am ruling out buying an FAC air gun but I will keep in touch. Regards Peter Quote Link to comment Share on other sites More sharing options...
Dave-G Posted Wednesday at 13:53 Author Report Share Posted Wednesday at 13:53 (edited) Thanks for the reply Peter, I also have a 12G over and under that could sweeten a deal for someone. And a mini hobby milling machine and a Clark metal bench lathe that needs some TLC with tooling for sale. Edited Wednesday at 20:05 by Dave-G Quote Link to comment Share on other sites More sharing options...
Dave-G Posted Wednesday at 20:34 Author Report Share Posted Wednesday at 20:34 (edited) As the rifle needs to go to a ticket holder: a buyer may be someone with a co-terminus SGC:- I only bought this oldy 12G to knock out some crows nests years ago then had no further use for it. I'll put this with the rifle, scope, and Cyclone maintenance spares. ------------------------------------------------------------------------------------------------------------------------------ Whilst my prime objective is to swap for a decent legal limit bare .177 PCP multi shot air rifle I'd sell this package for £500 and buy a .177 elsewhere so I can leave it to my son to use or sell when the time comes without it getting confiscated. I have several scopes so would not want to split the scope from the rifle. To be collected with tickets from Leicester. Edited Wednesday at 22:09 by Dave-G Quote Link to comment Share on other sites More sharing options...
Dave-G Posted Wednesday at 22:21 Author Report Share Posted Wednesday at 22:21 (edited) OR 🙃 All of the above plus a Clark 26mm headstock metal work bench lathe that needs some minor tool post slack attention with loads of tools for it (it'll need two big men to carry it - I can be a third to help load it into a van) - and a mini hobby milling machine with tooling: Swap for a 35mm or larger objective lensed thermal rifle scope suitable for outer HMR ranges at low mags if anyone is upgrading. Photos can follow if there's any interest. Edited Wednesday at 22:24 by Dave-G Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.