TR1
-
Posts
437 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by TR1
-
-
Check service history for injector seals change.
Look at oil pressure light on start up from cold.
Check 4 wheel drive centre diff lock and high/ low range..
Look carefully for rust on rear chassis and inner chills .
Save up for the road tax.
-
Can someone explain why the energy support payment is going to all households with an energy supplier account.
A lot of those who receive the £400 will still be on a fixed tariff (some for up to 2 years) and therefore not exposed to the price cap increase.
Why does the government not leave the price cap as it is and pay the energy suppliers a sum which they have to use to offset the costs they supposedly are seeing.
-
The Investarm fully moderated has ported barrels which are at risk of blocking with no fibre wads.
Potential then to cause a barrel blockage with subsequent lodged wad.
-
Whatever Shot type the wad needs to be fibre not plastic
so that limits the choice. -
Yes on Hilux last summer.
Due to redo in a couple of months with enough left from last year
-
Good stuff , easy to apply and goes a long way.
Just make sure you clean off chassis and prep well.
-
Thanks for reply just had the first company to quote for just the roof replacement on a 4M x 3.5M Victorian style.
Luckily I was sitting down when after the group discount he offered to sign me up today for £15K.
Shortly after he left empty handed.
-
Thanks for reply
-
If you don’t mind me asking what is the price for the roof conversion shown above.
is it a total structure replacement ?
-
I use 6mm sash cord , it is white and therefore easier to find if dropped.
Also if you use a 3/4 tap washer as the stop the 6mm fits nicely to give good grip.
-
I used the 28g 61/2 plastic wad for many years and found them superb on pigeon.
My normal supplier only carries them now in fibre wad which I find have much more recoil and less effective on the birds.
-
Check the highway authorities pothole reporting site to see if the defect has previously been reported. If it has then they cannot claim as a not known issue.
-
Looking for an original Croots rotary bag as used to be sold by Shoot Warehouse. Must be in good order
Anyone wanting to sell
-
-
Would the Lidl unit take an O/U action
-
What’s actually wrong with the original remote.
have found in the past that dismantling and cleaning the touch pads / board can sort many problems
-
Thanks for that. Cleaned all forend parts and actual ejection has improved.
Looking closely at the cocking rod and levers the left hand rod becomes stiff to move after leaving the action for over 4 hour ,
cocking lever seems free.
Cleaned and oiled without removing rods etc waiting to see if any better tomorrow.
If not I guess it’s a strip down and polish rod / guide hole.
-
Not checked old spring length yet.
Still trying to find why the top ejector works as an ejector (not lifter) when the unloaded gun has been left for more than 12 hours unfired. Looking possibility of a sticking cocking rod/lever.
The ejectors work normally when firing the gun and work as lifters if the loaded unfired gun is opened.FYI the gun is 1987 and seen quite a lot of regular work.
-
Just wanted to check as part of clean and service.
GMK not responded.
Been advised 63mm by online seller.
-
Could anyone please confirm the length of an original (new) Beretta 686 ejector spring
thanks in advance
-
1 hour ago, Scully said:
Great! Someone somewhere has a fabulous little gun! 👍
Yep a PW member
-
-
Has anyone found a bypass that actually works ?
-
toyota landcruiser
in Motoring Section
Posted · Edited by TR1
If you get a late 2006 or newer it’s about £615
older £360