gummy_bear

where about are you?

you might get away with this one https://www.fishingmegastore.com/pads/benelli-comfortech-3-polyurethane-recoil-pad~74528.html if nothing available from members, all chokes and parts are available through GMK, must be ordered by your local GMK dealer.

Hi, I bought recently a benelli 20ga montefeltro. The stock is a bit short for me. After a bit of begging for parts 😀 , I end it up buying a beretta gel pad for £22 that are widely available and 3D print a spacer that will join the two. Here the prototype in blue for my 20ga and 12ga. I also have the 12ga version that will use the original benelli pad. Now, I could print spacers for super 90, centro and montefeltro that will allow to use a beretta gell pad or the original benelli pad to get the right LOP. adrian

here what I came up with: At the local gun shop I found a Beretta gel pad and I designed a spacer that will make it fit to my Benelli. 👍 Drop me a pm if you are on the market for a spacer. 😀 a

It looks that the gun is not very common but I made some progress. I found some chokes at the local gun shop. GMK has the shims available. I am missing a good recoil pad and some spacers to get the right LOP. Anyone having a 3D printing file for spacers that I could use? thanks, a

Hi, I am after a normal / long stock for a benelli 20ga montefeltro. I could do a swap with the current youth stock, if anyone interested. Also interested on any benelli montefeltro : chokes on 20ga flavor, shims, choke key, recoil pads, parts etc, . I think there is a bit of compatibility with super 90, and the M2. thanks,

are they 70mm?

Hi, I do have four boxes of 28ga Eley Grand Prix - 21/2", 9/16oz, 6 shot, paper rolled, smokeless, water resistant. Will swap them for carts on 410, 20 or 12 ga. based in Dundee. thanks, a

got them. thanks

do you have the link? are they working ok? I mean keeping the powder inside. With my lee I am getting some powder on the table from the slide.

snarepeg, very kindly, give me the 70mm crimping tube. I have a lathe and a 3D printer. A bit on beginner side with the 3D printing. Still playing with the CAD. Would you share the 3D printing files?

Hi, I am trying to revive an old bowman 12ga reloading press that is missing few parts (actually all loose ones 😪). Anyone having handy the two metals barrels used for the final crimping stage? for 2 3/4 and 3" shells? I need length and internal diameter measurements. thanks, a

As per title. I am after a set or parts of a 20ga mec jr die set. thanks, a

Hi, I am after a .22 moderator for an air gun/ off ticket. atec, sak, parker, wisper, etc ... Please pm me if something available. thanks, a

Hi, I got a chrony F1 that is missing one out of four white plastic bits that are making the diffuser. Please let me know if any spares from a broken one available / or if there is a place where I could order parts/ or anyone having a "homemade" solution. for parts available, pls pm me. thanks, adrian

I got the rifle a while back and I fitted a lighter spring but the tube is not perfect - there is some creep left these days, I am using it a bit more and there is the tiny little travel I searched Rimfire Magic, CZ uk sells only the springs, Rifle Basix a bit high on price but probably a fine one. I might have a play on my mini lathe see is I can make one tube if nothing acceptable comes to the surface thanks, a

anyone having a CZ trigger kit or a suggestion where to buy them these days? I replaced the spring but there is some creep left on the trigger and I do not like it pls pm me you have one for sale, so I can get the notification thanks a

I am after a mec charge bar for a single stage loader a primer seating pad 12ga cam crimp assembly please pm me if anything available. thanks, a

50cm long as per picture

as per title, I do have a good number of magnum goose decoy heads. £3 each or a deal on the job lot.

I am after a deactivated o/u. Pls PM me if something available or suggestions. thanks, a

Hi, I would like to get a Benelli on 20ga flavor. Preferable 90, m2, centro montefeltro. Could offer for an adjusted swap a 20ga OU Franchi veloce, as new, less than 200 carts through, with case, chokes; or a 12ga 686 DTL Special. thanks, a

at the moment, there is a nice one on ebay https://www.ebay.co.uk/itm/194589329659?hash=item2d4e6d88fb:g:8VYAAOSw62xhmjCF

I am mainly after the primer seating rod, and the bolts for the crimping and crimp finishing stations. pls pm me if something available. thanks a

thanks for your advice, a bit hard with .410; I will probably end up buying some new ones , play a bit, then go back to 12ga.