R33SY

Price lowered to £1350 and willing to RFD Regards R33SY

Hi All This is my gun I'm having a clear out and this will be followed by my Browning GTI Ultra S (with game scene engraving) and also my BSA R10 Mk2 formerly owned by Evo and slightly upgraded by me (regulator and silencer ) Regards R33SY

That's expensive for what it is ! I used the grace one much better quality R33SY

Samsung Panasonic and Sony are all great TV,s Most if not all are smart tv's these days In the 55 inch category the Samsung 55h6400 is a great TV especially if watching blu Ray I have a small living room 4metre x 4 metre and my 55 inch is wall mounted I moved from a 46 to a 55 and because of the thin bezel not much difference in physical size as with most tv's these days not a lot of difference in picture quality between them it is as much about looks when you go that big , switched of mine is just a black slab on the wall , not the prettiest thing to look at but when on wow ! Big TV short viewing distance is where 4k comes into its own ( more pixels = finer picture ) also up to date as well Hope this helps R33SY

In that case I would be interested in the bottle only But as not a member on here don't expect any replies R33SY

No longer have the 682 classic so these are surplus 1 x beretta/ bennelli modified extended choke it has a blue band around the top 1 x beretta/ bennelli x2 extended choke knurled end, improved modified £23 each inc postage or swap for some jsb exacts in .22 flavour or some beretta gun socks to fit 32" barrels Regards R33SY

1 have a pair of rhino ported chokes in half and half £80 posted Regards R33SY

Hi all Just wondering if anyone would have a set of beretta gun socks laying around unused I would like a pair for my 32" gold E If you have let me know how much or maybe a trade for something Best regards Neil

Look forward to this re opening. Learnt to shoot there in the early eighties Then it was run by the Americans only had skeet and down the line American beer and food was great was cheap shooting as well used to bunk of work to go It was still a good place to up until the fire if a little pricey / unfriendly Good luck with the venture. I am sure you will do well R33SY

Thanks all for the replies Paolo180 thanks mine measure up at 9.0 mm exactly Welshwarrior. You have a pm Regards R33SY

Almost right but not quite , not bad for a non beretta owner though , But the stub pins screw in from the outside only the hex driver is on the inside the raised polished dome is integral to these pins Hence the idea of replacing them with standard size ( if that is what is fitted) Regards R33SY

Hi Can any of you knowledgeable gentlemen / ladies tell me me the standard diameter of said hinge pin And also know of where I can get replacements from The chrome has become slightly scratched due the my gun slip and I don't think it will polish out Many thanks R33SY

I had mine re blued bu mid counties blacking I think it was about £160 No problem with the post office taking them but they were sent back to an rfd They did a fantastic job You can google mid counties blacking to see there website R33SY

paid and addy pm'd Regards R33SY

I will take this Please pm payment details Regards R33SY

I have a 682 gold e adjustable stock and forend I would like refinished in oil (presently finished in oil) I would normally do it myself but don't have the time how much would it be and what's your turnaround time ? Regards R33SY

If price includes delivery I will take for asking Regards R33SY

Should of said it was for an ultra I do carbon fibre ones with nylon retainers for the reciever end They look dam good as well Regards R33SY

When you compress air it heats up and expands it is how a jet engine works By keeping it cool in a tank of water you can actually fill to the required pressure with the full amount R33SY

Would you sell the bottle separately ? R33SY

Hi all and thanks for your ideas I shall remove scope ,silencer and stock tomorrow clan barrel mount in a fixture and see how it shoots Before reassembling silencer first then scope to see if any changes occur it will give me something to do Checking alignment would be easy at work but not back in till the 5th Whilst in bits I will recrown the barrel as well I don't mind making bits for it. It sort of personalises my gun Anything I make that's good usually gets made in numbers and sold Carbon shrouds silencers in carbon and ally etc The r10 is a good looking gun but was built to a price and some parts are disappointing on it from a quality point of view But in all fairness on the whole it does do what it is supposed too I do have a nice straight edge suitable for checking barrel to reciever alignment and that will be interesting Without your inputs I wouldn't of thought of a lot of things to check I seem to be in holiday mode and need to get my brain in gear Hopefully I can get some photos up of it and the bits I have made for your comments Thanks again R33SY Oh and 1066 you are so right at the moment I have a solution to a problem but have not actually fixed the problem itself !

Thanks for all your replies it certainly gave me something to think about My gun shoots off by 6' inches at 25 yards doing the maths with trig that's about a quarter of a degree not a bad tolerance for a mas s produced gun My scope is now aligned on the same angle as the trajectory of the pellet so different distances should not make a difference If I had used mounts that were straight and adjusted the scope in the usual way then I think I would have problems at differing ranges due to the misalignment of scope and barrel Well that's my theory behind it but like a lot of times my theory and practice don't always work out Though I am having a lot of fun learning along the way Happy new year to PW Members and thanks for taking the time too look in and comment R33SY

I have a pair of rhino ported chokes in 1/2 and 1/2 flavour surpluss to requirements These chokes are in excellent used condition with no discernible damage In competition use I have found these chokes to be simply amazing and cover almost all my needs I have not shot a competition for 18 months so these are no longer needed for the occasional Sunday shoot I am looking for £120 for the pair delivered Thanks for looking R33SY

The moderator is of my own design and making its not clipping and I've not had chance to try it without as my neighbours Are of the type to call the law at the first sound of a muzzle crack The pellets I was given and are AA fields my preferred ammo is Accupels so that is something I could try Cleaning I hadn't thought about that so that is defiantly on the books to do As for power I too don't think it's down I use an internal door for my backstop with carpet behind it to arrest the pellet and at 25 yards its passing cleanly through the door Roughly how far are most people out with there first shot when setting up a scope ? Thanks for your help tand ideas to try Best regards R33SY

Hi Gordon The not so good stock is useable and not in bad Nick really It's just getting in my way The other stock cost me £450 and is gorgeous but the one fitted to the gun is just as good but has been joined at some time Originally it annoyed me but now I can live with so have put the good one up for sale I have done quite a few adjustable stocks in my time based on the graco system and my 682 has the factory fitted option but at the end of the day I preferr an unadulterated stock I think they looks so much better Regards R33SY