soreshoulder Posted September 4, 2010 Report Share Posted September 4, 2010 hi all, i own a beretta 686 silver perdiz and would like to know how to remove the ejectors, can anyone help? also there is a small click just as i move the gun from being completely open to a fraction more closed is this normal? Quote Link to comment Share on other sites More sharing options...
Schern Posted September 4, 2010 Report Share Posted September 4, 2010 If it's anything like my 682 then have the gun on it side with barrels pointing to the left, push the ejector in slightly and twist it so that the bottom of the ejector slides out of the groove. Just watch for the spring and pin or whatever its called flying out as you remove the ejector. Quote Link to comment Share on other sites More sharing options...
AndyCM Posted September 4, 2010 Report Share Posted September 4, 2010 Wearing gardening gloves makes for a painfree maintenance job.....those extractors have sharp edges & the spring has some tension locked up there Quote Link to comment Share on other sites More sharing options...
fluke2 Posted September 4, 2010 Report Share Posted September 4, 2010 hi all, i own a beretta 686 silver perdiz and would like to know how to remove the ejectors, can anyone help? also there is a small click just as i move the gun from being completely open to a fraction more closed is this normal? Neither of mine have the click your mentioning just checked 686+682. the ejectors are a svine to remove you have to push them down and twist them at the same time takes some doing and strong thumbs, I think its push down and twist clockwise with the left ejector,anticlock with the right one,and a bugg to put back in Quote Link to comment Share on other sites More sharing options...
soreshoulder Posted September 4, 2010 Author Report Share Posted September 4, 2010 cheers guys got em out, they are very fouled and i will probably be asking how to get them back in in an hours or so Quote Link to comment Share on other sites More sharing options...
Schern Posted September 4, 2010 Report Share Posted September 4, 2010 I'm just in the process of putting together a little video of the removal and refit process. Also has the click you're on about I think. Quote Link to comment Share on other sites More sharing options...
Schern Posted September 4, 2010 Report Share Posted September 4, 2010 Here you go, gives you the general idea. Quote Link to comment Share on other sites More sharing options...
libs Posted September 4, 2010 Report Share Posted September 4, 2010 Beacuse of this thread my beretta is now in lots of bits on my table, and in my ultrasonic cleaner. Thanks for wasting my time! Quote Link to comment Share on other sites More sharing options...
fluke2 Posted September 4, 2010 Report Share Posted September 4, 2010 Beacuse of this thread my beretta is now in lots of bits on my table, and in my ultrasonic cleaner. Thanks for wasting my time! If you take the stock off theres loads more bits under there will fit in the ultrasonic cleaner Quote Link to comment Share on other sites More sharing options...
soreshoulder Posted September 4, 2010 Author Report Share Posted September 4, 2010 Here you go, gives you the general idea. TOP MAN Quote Link to comment Share on other sites More sharing options...
libs Posted September 4, 2010 Report Share Posted September 4, 2010 If you take the stock off theres loads more bits under there will fit in the ultrasonic cleaner I looked at thoese gubbins when I refinished my stock. I saw springs and after my youth esperience with a moped gearbox I am never touching anything complicated that has something under tension again! Quote Link to comment Share on other sites More sharing options...
Schern Posted September 4, 2010 Report Share Posted September 4, 2010 TOP MAN At the beginning, is that the click you mentioned? It sounds like it's a spring just starting to get tensioned up or something. Seems to come from somewhere in the vicinity of the forend. Don't think it's anything to worry about. Quote Link to comment Share on other sites More sharing options...
mr_magicfingers Posted March 14, 2014 Report Share Posted March 14, 2014 Just bought a second-hand beretta that looks like it's not been cleaned in a long while. This is now on my list of things to do next week. I'll be finding an old toothbrush, a roll of kitchen roll and a lot of napier cleaner and going over it thoroughly. Thanks Schern for a really useful little video. Quote Link to comment Share on other sites More sharing options...
station Posted March 14, 2014 Report Share Posted March 14, 2014 Anyone know how to do the same but on a 692 ? Different to my 686e and cannot find a video or info on line. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.