Zapp Posted February 18, 2006 Report Share Posted February 18, 2006 Hi folks. Got my new Urika on thursday. It came with Optima chokes, and on inspection I found that the 1/4 choke has a very small imperfection on the back end (ie the end furthest from the muzzle) which protrudes upward into the bore. My fear is that over time this could be weakened, and could be forced upward by the force of the shot creating an obstruction in the barrel. Am i right to worry about this (the imperfection is VERY small), or should I get it looked at pronto before I end up with a cartoony style "banana peel" barrel (or worse) ? Cheers, Pete Quote Link to comment Share on other sites More sharing options...
bindi Posted February 18, 2006 Report Share Posted February 18, 2006 Yep, take it back to where you bought it, and they'll swap you the chokes round, or if you didn't buy it new, just go to a beretta dealer and I'm sure they'll help you out. If not, give GMK a ring, they are very helpful, their number is in all the mags, Bindi Quote Link to comment Share on other sites More sharing options...
dunganick Posted February 18, 2006 Report Share Posted February 18, 2006 Got my new Urika well take the choke tube back and ask for another it is new, there is no reason to accept a non new part. Quote Link to comment Share on other sites More sharing options...
henry d Posted February 19, 2006 Report Share Posted February 19, 2006 Gerrit back pronto Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.