jb410 Posted September 12, 2011 Report Share Posted September 12, 2011 This is a possible answer that will leave the safe in a reasonable state so if you want to reuse you can. step 1 Drill the lock hole so that you have a hole about 13mm in dia at the slot end. When you have got through the door keep drilling into the lock face. step 2 When you have drilled the lock face you will see some brass tumblers you need to drill these so you can turn them with a screwdriver. This method will leave some damage to the door that the FEO may let you get away with, its not the fastest way and is a bit fiddley but the second will be easier after the practice on the first. Quote Link to comment Share on other sites More sharing options...
gixer1 Posted September 12, 2011 Report Share Posted September 12, 2011 A super rare pair of h&h's would be nice and if you use a gas axe you may get it open just in time to watch the pretty flames on the stocks of them... Quote Link to comment Share on other sites More sharing options...
highseas Posted September 12, 2011 Report Share Posted September 12, 2011 cut the top off much easer to weld back on Quote Link to comment Share on other sites More sharing options...
Grandalf Posted September 12, 2011 Report Share Posted September 12, 2011 I'm changing my vote - Highseas has it. Lateral thinking - out of the box as you might say. Quote Link to comment Share on other sites More sharing options...
fruitloop Posted September 12, 2011 Report Share Posted September 12, 2011 laser cutting disk thay are 1mm thick then where the lock is and the bolt comes out of the lock do 1 cut thrugh the door down cuttin the bolt off leving the door with only a 1mm slot in itwich is easy to weld updo that to both locks and hay presto yr in Quote Link to comment Share on other sites More sharing options...
fat_jay Posted September 12, 2011 Report Share Posted September 12, 2011 Small hole and an endoscope, shame your not closer, you could have borrowed mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.