cockercas Posted March 5, 2012 Report Share Posted March 5, 2012 my 10/22 is in bits. ive got a nylon bolt buffer and the auto bolt is done so before i put it back together is there anything else to do to it? Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted March 5, 2012 Report Share Posted March 5, 2012 Extended mag release and the polish the inside top of the action if it is not smooth to cock. Loads of other stuff you could do. I tween the trigger as I like a light trigger pull Quote Link to comment Share on other sites More sharing options...
Farmer-of-the-Futre Posted March 6, 2012 Report Share Posted March 6, 2012 ^ Quote Link to comment Share on other sites More sharing options...
coyotemaster Posted March 7, 2012 Report Share Posted March 7, 2012 Extended mag release and the polish the inside top of the action if it is not smooth to cock. Loads of other stuff you could do. I tween the trigger as I like a light trigger pull ++ I would definetly do something with the trigger they are "almost" unbearable from the factory. Quote Link to comment Share on other sites More sharing options...
Bradders Posted March 7, 2012 Report Share Posted March 7, 2012 I would also "radius" the rear/bottom of the bolt as this makes it smoother and make the resetting to the hammer smoother. tale a look at www.rimfirecentral.com they have oodles of ideas..... Quote Link to comment Share on other sites More sharing options...
Bradders Posted March 7, 2012 Report Share Posted March 7, 2012 (edited) oops....duplicate post.....removed...... Edited March 7, 2012 by Bradders Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.