diddy Posted September 1, 2013 Report Share Posted September 1, 2013 I appear to have lost the screw on collar and the piece that stops the extendable pole from sliding up and down on my bouncers is there anywhere you could recommend for spares? Quote Link to comment Share on other sites More sharing options...
superspark Posted September 1, 2013 Report Share Posted September 1, 2013 A1 Decoys sell a lot of spares for bouncers and rotaries, might be worth having a look on their website mate. Quote Link to comment Share on other sites More sharing options...
NickB65 Posted September 2, 2013 Report Share Posted September 2, 2013 I hate my bouncers as every time I use them the bird ends up flying sideways or upside down due to the wind. The bird is clamped tight onto the rod but the rod turns due to the wind and I end up with a sideways bird which always puts off incoming pigeons as they don't seem to like seeing their kin flying upside down. Anyone got any ideas as to how to stop this? Quote Link to comment Share on other sites More sharing options...
GingerCat Posted September 3, 2013 Report Share Posted September 3, 2013 Tape round the bit that rotates to stiffen it up a bit. Fixed my upside down pigeon, not too much though or you won't be able to connect it Quote Link to comment Share on other sites More sharing options...
mag357 Posted September 4, 2013 Report Share Posted September 4, 2013 Change to a one piece rod that we supply....problem solved.Experimented with a two piece rod a while back and found it was not worth the effort, why complicate something that is dead simple. Quote Link to comment Share on other sites More sharing options...
hawkeye Posted September 4, 2013 Report Share Posted September 4, 2013 Only trouble is there rods are for real birds ours will not take the weight of a real woody.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.