Fitting sling to hatsan escort?

[Reeceknight]

I have seen a number of them on the Internet with slings on, I have also found the swivel type mounts separate on eBay but what's the score with figment? or do I get the parts for my pacific gun?

 

grateful for any help chaps

 

Reece

[Blackbart]

You only need 3 things...a swivel for the stock,a swivel ring that goes onto the magazine tube and a sling !

 

Drill the stock near the butt and attach swivel then remove mag tube and slide on the ring swivel then attach your sling simples.....

 

 

Takes about 20 mins

[steve_b_wales]

You only need 3 things...a swivel for the stock,a swivel ring that goes onto the magazine tube and a sling !

 

Drill the stock near the butt and attach swivel then remove mag tube and slide on the ring swivel then attach your sling simples.....

 

 

Takes about 20 mins

As above. To fit the stud into the stock, I drilled a smaller pilot hole first. You can get the mag tube swivel from most RFD's who will order one for you. I bought mine from Sportsman Guncentre.

[Reeceknight]

so dead the model of escort or age mean ordering different end cap for the mag tube or do they all fit eachother?

[flynny]

As above. To fit the stud into the stock, I drilled a smaller pilot hole first. You can get the mag tube swivel from most RFD's who will order one for you. I bought mine from Sportsman Guncentre.

Bang on the one Steve b sold to me works a treat,

 

Atb

 

Flynny

[Reeceknight]

Is it possible for someone to send me a link or a picture of there swivel in the stock? Thanks for all your help