Rebel Posted April 23, 2014 Report Share Posted April 23, 2014 (edited) Would it be okay use copper grease on the inside sleave of my mod or is there something else,also what type of lube should i put on the rubber seals thanks Edited April 23, 2014 by Rebel Quote Link to comment Share on other sites More sharing options...
Dougy Posted April 23, 2014 Report Share Posted April 23, 2014 (edited) . I use grease on mine, depends whatever nearest, just a small dab. Edited April 23, 2014 by Dougy Quote Link to comment Share on other sites More sharing options...
r1steele Posted April 23, 2014 Report Share Posted April 23, 2014 I've used copper slip for years but as Dougy has said, whatever you can get a hold of should do fine. Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted April 23, 2014 Report Share Posted April 23, 2014 Copper slip is excellent. i use it on all my barrel threads. I also smear a thin film on the barrel where some of the moderators slide over. Quote Link to comment Share on other sites More sharing options...
rtaylor Posted April 23, 2014 Report Share Posted April 23, 2014 Any grease will do just fine. I also put it on the rubber o-ring. Copper grease will work very well in both applications. Quote Link to comment Share on other sites More sharing options...
Rebel Posted April 24, 2014 Author Report Share Posted April 24, 2014 Thanks guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.