viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 . . Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 and also got front wheels on, just need to locate the new center caps, you may also notice i did away with the free wheeling hubs, 2 reasons, one seemed like it was bust, and they were not original for the vehicle i believe, so bought a lit to convert it back curry night Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted September 5, 2016 Report Share Posted September 5, 2016 I think with the VIN, I would buy another and get it stamped level and then scratch it up a little and get some oily marks on it. Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 Good thinking. It was only £15 so not to bad. Who would or could do it properly. Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 question. what sort of sound proofing should i get for under the bonnet?? Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted September 5, 2016 Report Share Posted September 5, 2016 (edited) This any good, it shows it fitted to a Series http://www.nkgroup.co.uk/product/land-rover-under-bonnets/ Edited September 5, 2016 by Fuji Shooter Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 looks just the ticket, wonder if its to cut yourself as there is a drop down menu with land rover and discos, doesn't say series, not that it would be hard to cut, he says Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 just read that you will be asked what vehicle its for during checkout, Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 there is some on ebay for £30 38" X 37", thats probably not enough, and its to cut, seeing some of my handy work id rather spend the extra £25 know its right and i dont have to cut it cheers FS Quote Link to comment Share on other sites More sharing options...
ditchman Posted September 5, 2016 Report Share Posted September 5, 2016 thought it was your curry night ? Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 been, pint in the pub, then to curry house, 2 poppadoms, sheikh kebab , chicken madras, garlic Nan, stopped off at petrol station and got 7 chocolate bars Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 I think with the VIN, I would buy another and get it stamped level and then scratch it up a little and get some oily marks on it. i was just thinking, get another plate, get all the numbers and letters together, than tack them all together with the MIG, and one good bang Quote Link to comment Share on other sites More sharing options...
la bala Posted September 5, 2016 Report Share Posted September 5, 2016 i was just thinking, get another plate, get all the numbers and letters together, than tack them all together with the MIG, and one good bang http://www.classic-plates.com/ Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 or, one of theses Quote Link to comment Share on other sites More sharing options...
viking Posted September 5, 2016 Author Report Share Posted September 5, 2016 would this do?? http://www.pegasusparts.co.uk/ourshop_90073/prod_3603322-PLATE-ENGRAVING-Engraving-of-chassis-or-VIN-number.html Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted September 6, 2016 Report Share Posted September 6, 2016 Your local key cutters / shoe repairers normally are able to engrave. Might be worth a pop in if you are passing. Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 just ordered the one above from pagasus, £20 Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 (edited) you cant put them vents back in like that.....no no no no no no......give them to you mate to unseize and he can tickle it up with weld and you can paint them up with aluminium paint............. think what might happen.....curry the previous night...egg sarnies for breakfast...drive out at lunchtime with friends in the back....it will be like blowing off in a lift ...captive audiance.....vents dont work...... inquest..........death by methane gas....... if he cant do them send them to me ...you have my address... rite ditchie, had a word with my mate, he said he could have ago but probably wouldn't do any better than i did.so rather that him mess them up more, im going to send them to the master, they will be in the post later when i go shooting top man edit to redact address Edited September 6, 2016 by viking Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 managed to get this on properly today, it was just hanging before as had problem with them things in the bulkhead that they screwed in to, they just span before, now sorted please please dont ask how i sorted it out Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 also thought id try make a start on the dash, got top bit on ok but couldnt manage bottom bit on my own, to awkward and bloody wires everywhere Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 every job done is one less to do Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 front air vents now in full working order, Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 i must get it from you DD this looks more than interesting http://www.ebay.co.uk/itm/201655020050?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT finished at £7400, reserve not met, Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted September 6, 2016 Report Share Posted September 6, 2016 Shame as the advert read well, Quote Link to comment Share on other sites More sharing options...
viking Posted September 6, 2016 Author Report Share Posted September 6, 2016 thought it would of done more Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.