colin lad Posted October 13, 2016 Report Share Posted October 13, 2016 I brought 40 federal rounds to run my 204 in with the intention of reloading the brass but upon priming them I found they have crimps in, have seen vids on youtube not keen on the idea of using a countersink tool but wondering if any of you have used a primer pocket reamer tool, are they any good and do they work or should I just bin the brass Colin Quote Link to comment Share on other sites More sharing options...
Andy RV Posted October 13, 2016 Report Share Posted October 13, 2016 I've used the RCBS primer pocket swager which worked well! I tried a countersink first but the particular brass, GGG, had very tight primer pockets which the countersink didn't touch. Quote Link to comment Share on other sites More sharing options...
Vince Green Posted October 13, 2016 Report Share Posted October 13, 2016 I have just used an oversized drill bit for years, finally got round to upgrading to a hand countersink last year and it works fine Quote Link to comment Share on other sites More sharing options...
activeviii Posted October 17, 2016 Report Share Posted October 17, 2016 Inside Neck chamfer tool just to nick the crimp. I use the Wilson double ended tool Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.