pigeonbasher1 Posted December 23, 2017 Report Share Posted December 23, 2017 as anyone fitted a photon to a airarms s410 please, if so how's it done, if it can be done, cheers ray Quote Link to comment Share on other sites More sharing options...
Snoozer Posted December 23, 2017 Report Share Posted December 23, 2017 Have a read here and some pics further down the page. http://www.thehuntinglife.com/forums/topic/332548-yukon-photon-xt-65-x-50/?page=5 Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted December 23, 2017 Report Share Posted December 23, 2017 hello PB, first is that the mark 1 or XT photon, i have my shorter mk1 on a FX verminator and this has a short rail like the AA 410 so i use a forward reach 30mm mount but turned around so the eye bell is nearer to you, if you have the XT and it is longer i would think a pair of high 30mm mounts should work ok Quote Link to comment Share on other sites More sharing options...
pigeonbasher1 Posted December 23, 2017 Author Report Share Posted December 23, 2017 yes m8 its the xt, ill have a search for some 30mm mounts Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted December 23, 2017 Report Share Posted December 23, 2017 (edited) 1 hour ago, pigeonbasher1 said: yes m8 its the xt, ill have a search for some 30mm mounts hello ray, before you buy some mounts just check the rail length against the XT tube to make sure there is enough space between front and rear to put on mounts and you can get a good eye on rear glass, on the pair of mounts i used knowing the S410 rail is very precisely machined i filed the V blocks a tad sharper so they fitted better into the groove and gives a better hold, the XT is a fair weight on a light PCP, Edited December 23, 2017 by oldypigeonpopper Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.