Beretta A301

[matgriff]

I have a mid 80's Beretta A301 multi choke.

Can anyone tell me how to remove the cocking handle so that I can strip the gun down.  I've removed the pin and trigger block, just can't quite see how to remove the cocking lever.

 

Thanks

 

Mat

 

 

[Farmboy91]

The one on my 303 comes out with a firm pull, possibly the same? 

Think I found a video on YouTube on how to strip it fully. 

[GingerCat]

My 390 is stripped by unscewing the barrel and removing it and then just pulling the cocking bar out with a but if a tug. The bolt assembly then slides out. I suspect it's the same. Try a bit of cloth and pliers to get a good grip.

[matgriff]

Yep, thanks done it... it just pulled out.

Had about 10 years worth of crud inside the trigger and action... it's the first time I've stripped it right down to clean it, only had it about a year.

Noticed yesterday that it jammed twice whist out claying, so thought I'd get it cleaned :-)

 

 

Thanks

 

Mat

 

 

[GingerCat]

I really must get the trigger out on mine for a good clean. I'm guessing you just tap the pins out?

[matgriff]

The trigger block is simple to remove, just tap the pin out with a small drift, press the loading latch button (the one you press to feed the cartridges in) and then the trigger mech just lifts out.