Dekers Posted March 20, 2019 Author Report Share Posted March 20, 2019 13 hours ago, figgy said: You don't need to use a back plate, they're just to make it easy. You can use 1/2" or 3/4" back plate elbows and brass nipples. Depending on the size of your bar mixer connections. This what I did but used the chrome 3/4x1/2" reducers that came with the kit as a couple of threads show between the wall rosette and mixer connections. I want to make the backplate because it just makes it easier! That's the bits I was after! (which I think I have sourced now) Quote Link to comment Share on other sites More sharing options...
figgy Posted March 20, 2019 Report Share Posted March 20, 2019 Deekers if you get stuck sourcing the correct bar mixer reducers. You could use a 3/4" bsp female back plate elbow and a 3/4" bsp stainless steel close tapered pipe nipple to come out the wall to your bar mixer. Quote Link to comment Share on other sites More sharing options...
vampire Posted March 20, 2019 Report Share Posted March 20, 2019 I always just use the kit from screwfix now as its much easier no matter what centres are of mixer valve.Just remember not to use speed fit elbow in the wall void Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.