davewh100 Posted February 3, 2021 Report Share Posted February 3, 2021 my mate as a bsa ultra with a leak on the filling cylinder but he is struggling to remove a brass like piece with holes in it, he as the tool with the two prongs but it wont budge any ideas how to remove this please would be most appropriate dave Quote Link to comment Share on other sites More sharing options...
ianspire Posted February 3, 2021 Report Share Posted February 3, 2021 Look on YouTube, XTX Air did a video for these, if I remember correctly you dry fire till empty, turn the fill valve as if to tighten it then there is a lock ring in between the cylinder and valve, remove this using a pick or small allen key and the valve should unscrew. Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted February 3, 2021 Report Share Posted February 3, 2021 Exactly what the man said above . Use a round bar that fits nice where the fill probe goes to wind it out .you don't want to damage the brass inside the hole Quote Link to comment Share on other sites More sharing options...
sportsbob Posted February 5, 2021 Report Share Posted February 5, 2021 On 03/02/2021 at 10:43, davewh100 said: my mate as a bsa ultra with a leak on the filling cylinder but he is struggling to remove a brass like piece with holes in it, he as the tool with the two prongs but it wont budge any ideas how to remove this please would be most appropriate dave If there is any air pressure left it will prevent it from being unscrewed. Quote Link to comment Share on other sites More sharing options...
davewh100 Posted February 6, 2021 Author Report Share Posted February 6, 2021 thanks for the advice lads it was passed on and he as managed to remove it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.