davewh100 Posted February 3 Share Posted February 3 my mate as a bsa ultra with a leak on the filling cylinder but he is struggling to remove a brass like piece with holes in it, he as the tool with the two prongs but it wont budge any ideas how to remove this please would be most appropriate dave Quote Link to post Share on other sites
ianspire Posted February 3 Share Posted February 3 Look on YouTube, XTX Air did a video for these, if I remember correctly you dry fire till empty, turn the fill valve as if to tighten it then there is a lock ring in between the cylinder and valve, remove this using a pick or small allen key and the valve should unscrew. Quote Link to post Share on other sites
Ultrastu Posted February 3 Share Posted February 3 Exactly what the man said above . Use a round bar that fits nice where the fill probe goes to wind it out .you don't want to damage the brass inside the hole Quote Link to post Share on other sites
sportsbob Posted February 5 Share Posted February 5 On 03/02/2021 at 10:43, davewh100 said: my mate as a bsa ultra with a leak on the filling cylinder but he is struggling to remove a brass like piece with holes in it, he as the tool with the two prongs but it wont budge any ideas how to remove this please would be most appropriate dave If there is any air pressure left it will prevent it from being unscrewed. Quote Link to post Share on other sites
davewh100 Posted February 6 Author Share Posted February 6 thanks for the advice lads it was passed on and he as managed to remove it Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.