Jump to content

Night Vision


Mungler
 Share

Recommended Posts

Could someone give me a quick idiots guide to Gen 1 Nightvision and in particular does anyone has any knowledge or experience of the Paladin NV scope - is it any good, any best setup tips and recommended operation etc. E.g. use a spotter scope as well or a NV monocular etc etc.

 

Gen 2 is out of the budget so no advice along the lines of "Give Gen 1 a swerve and buy Gen 2" :blink:

 

Also looking for a laser illuminator if anyone has one kicking around (come on, check deep down the back of the sofa).

 

Ta very,

 

M

Link to comment
Share on other sites

Could someone give me a quick idiots guide to Gen 1 Nightvision and in particular does anyone has any knowledge or experience of the Paladin NV scope - is it any good, any best setup tips and recommended operation etc. E.g. use a spotter scope as well or a NV monocular etc etc.

 

Gen 2 is out of the budget so no advice along the lines of "Give Gen 1 a swerve and buy Gen 2" :blink:

 

Also looking for a laser illuminator if anyone has one kicking around (come on, check deep down the back of the sofa).

 

Ta very,

 

M

 

 

Gen 1 is only really suitable for air rifle work mung.

 

Do a extra shift or two and get a gen 2 and send a pm to patsmash as he is doing very well on the NV front at the moment.

 

 

 

 

LB

Link to comment
Share on other sites

I have been advised to get a laser illuminator - the trouble is I don't know which one.

 

There are some off ebay and some fella off the BBS sells them.

Buy the very best you can afford - the higher the be careful tough some of the stuff on evilbay is cheap chinese rubbish,.

Link to comment
Share on other sites

I`ve got gen 1 on my 597. You do need additional illumination. I have a yukon ir torch on mine, and find it effective to shoot to about 50yds, but the furthest shot i have taken is about 60yds(paced out).

 

The unit i have is an ATN 330, which is a dedicated system, rather than an add on.

 

In use, i carry a monocular. Scanning about with a scope mounted rifle soon tires you out. Scan about with the monocular, then approach to within range, unsling and shoot.

 

Pay attention to fieldcraft as you would with anything else, and rabbits can be approached to within touching distance oblivious to the fact you are watching them. I`ve called in cubs to 20yds and taken them.

 

Nv is something to persevere with. Its not instant success, in fact i nearly sold mine not long after i got it. Now i couldnt be without it. Focal length is very short so you are turning the eye, and objective lenses fractionally all the time to get a sharp picture.

 

Some folks have ir lasers which are supposed to be a huge improvement over ir torches but they are expensive.

 

Cheers Andy.

Link to comment
Share on other sites

yep listen to tulkyuk he is talking sense you need a good infra red to boost your gen 1 i have had two gen 1s and gen2 plus. Getting the kite gen 3 in january cant wait :blink: :oops::w00t:

 

 

Steyrman, I don't want to poor water on your fire but I know 2 people who have/had kites and both of them had big trouble with zero shift the scopes just will not hold a zero, both of these people now only use their kites as spotters and they use the Longbow scope on the rifle.

 

Only trying to help, please don't shoot the messenger.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...