steve_b_wales Posted August 8, 2008 Report Share Posted August 8, 2008 (edited) To anyone who is going to buy a new T8 moderator and intends to put a muffler on it (as from Bushwear) please note that they are now approx two inches smaller in length. I purchased a new one yesterday together with the said muffler and now it's too long. Edited August 8, 2008 by steve_b_wales Quote Link to comment Share on other sites More sharing options...
codling99 Posted August 8, 2008 Report Share Posted August 8, 2008 cant you just cut the muffler down a bit steve?? Quote Link to comment Share on other sites More sharing options...
tulkyuk Posted August 8, 2008 Report Share Posted August 8, 2008 You have bought a T8 scout Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 8, 2008 Author Report Share Posted August 8, 2008 Never heard of a T8 scout, only a T4. Quote Link to comment Share on other sites More sharing options...
tulkyuk Posted August 8, 2008 Report Share Posted August 8, 2008 T8 scout is smaller than a normall T8, but bigger than a T8ar or T4 Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 8, 2008 Author Report Share Posted August 8, 2008 I've just come off the phone to Jackson Rifles who make the T8 and I was informed that the new T8 I have is indeed the new version which is smaller and lighter. I was also told that when the new version was tested, it proved to be as good as the 'old' version. We learn something new everyday Quote Link to comment Share on other sites More sharing options...
tikkamark Posted August 8, 2008 Report Share Posted August 8, 2008 I've just come off the phone to Jackson Rifles who make the T8 and I was informed that the new T8 I have is indeed the new version which is smaller and lighter. I was also told that when the new version was tested, it proved to be as good as the 'old' version.We learn something new everyday Did they tell you what they have changed it must still have the 8 baffles is the expansion chamber on the new model smaller?There a great mod pity the internals wernt stainless just for piece of mind..... Quote Link to comment Share on other sites More sharing options...
Baldrick Posted August 8, 2008 Report Share Posted August 8, 2008 I have got the new stumpy T8, and had to chop my Bush Wear neoprene cover to get it to fit properly. Not exactly a chore though, and the cover certainly deadens the 'ping' that sounds with each shot fired. Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 9, 2008 Author Report Share Posted August 9, 2008 (edited) The advert for the T8 etc states that it is an all steel moderator with no need for internal cleaning. If I'm out with my moderator and it's damp or wet, I just give a good squirt of WD40 inside it, let it run out and place the mod on a radiator for a while. The company told me that they reduced the size to compete with other smaller/lighter mod's. It still has 8 baffles and noise reduction is exaclty the same as the older/longer ones. Edited August 9, 2008 by steve_b_wales Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.