mark_mjs93 Posted May 27, 2009 Report Share Posted May 27, 2009 ok im a bit stuck... im working on a project but im looking for some shotgun precussion caps... spent... can someone point me in the right direction... im looking for 6 but i might cock atleast 2 of them up so im in search of about 8, if you could point me in the direction of were to get them... if possible it would help if they had a SMALL collar... if they dont it doesnt matter because i can cut them down to size... so im after 8 spent shotgun carts... if possible just the precussion caps... any help welcomed thanks..... Quote Link to comment Share on other sites More sharing options...
holly Posted May 27, 2009 Report Share Posted May 27, 2009 whats the project i am also working on a project that requires similar ? Quote Link to comment Share on other sites More sharing options...
libs Posted May 27, 2009 Report Share Posted May 27, 2009 get down a clay groud. The primers come out with a long nail and a sharp tap over a gap, say a hole drilled in a plank. Do this from the inside of the cart to the outside and obviosly only to spent shells before anyone starts. Quote Link to comment Share on other sites More sharing options...
mark_mjs93 Posted May 27, 2009 Author Report Share Posted May 27, 2009 well i wont say what the project is as its rather important i keep it a secrect at the moment.... i dont want just the primer... the whole cap is what i need... i cant give away want im making but it will be worth the wait trust me... Quote Link to comment Share on other sites More sharing options...
holly Posted May 27, 2009 Report Share Posted May 27, 2009 best way i have found is to slowly warm with a blow torch everything not wanted falls out with no distortion to the bits you need inert only Quote Link to comment Share on other sites More sharing options...
Ferret Master Posted May 27, 2009 Report Share Posted May 27, 2009 You want spent primers, de-primed from the case? If so I have lots. A whole large maggot pot full at the moment. FM Quote Link to comment Share on other sites More sharing options...
mark_mjs93 Posted May 27, 2009 Author Report Share Posted May 27, 2009 ok lol... ill re phrase it... lol i have written the wrong thing i think (dam my lack of cartridge knowlege) i think..... basically im looking for basically the whole brass section of the cartridge... im going to basically get rid of the plastic/paper casing so im just left with the brass part of the cart... then im going to trim the cart down to about a 5mm collar... then basically im going to cut a ciercle in a peice of wood, so that it is just an O in the board... you know so that you havent REMOVED the wood... just made a ring... and then im going to (using a bit of glue) press the cart collar into the board so it is mounted on the board... i hope that helps explain.... Quote Link to comment Share on other sites More sharing options...
libs Posted May 27, 2009 Report Share Posted May 27, 2009 Hacksaw then! Quote Link to comment Share on other sites More sharing options...
mark_mjs93 Posted May 27, 2009 Author Report Share Posted May 27, 2009 Hacksaw then! i have a hacksaw, and i know how to remove the part i need... im just looking for THE ACTUAL PART god you people are difficult... Quote Link to comment Share on other sites More sharing options...
christy_stone Posted May 28, 2009 Report Share Posted May 28, 2009 Just go bin diving at your local clay ground, they may think you are slightly insane but........ You will get what your looking for! Christy Quote Link to comment Share on other sites More sharing options...
holly Posted May 28, 2009 Report Share Posted May 28, 2009 yep Quote Link to comment Share on other sites More sharing options...
mark_mjs93 Posted May 28, 2009 Author Report Share Posted May 28, 2009 (edited) Just go bin diving at your local clay ground, they may think you are slightly insane but........ You will get what your looking for! Christy well i got a letter through frombasc this morning about a Basc youngshots day at a clay ground not far from me.... not sure when it is i cant bebothered to go check the letter although i expect this would get me a quite nice please dont come to a young shots shoot again thankyou.... Edited May 28, 2009 by mark_mjs93 Quote Link to comment Share on other sites More sharing options...
libs Posted May 28, 2009 Report Share Posted May 28, 2009 well i got a letter through frombasc this morning about a Basc youngshots day at a clay ground not far from me.... not sure when it is i cant bebothered to go check the letter although i expect this would get me a quite nice please dont come to a young shots shoot again thankyou.... Everyone has a few carts off the floor when they first shoot. No one will think anythings up! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.