Jump to content

blindeye

Members
  • Posts

    309
  • Joined

  • Last visited

Posts posted by blindeye

  1. been clearing out some stuff and come across a mains charger for a 6 volt battery . its a deben flat plug charger from a deben compact light set. and its free if some one can make use of it .will even post it free also .cant get any better than that.post on here an not pms , first one to message get a charger .

  2. having a scope repaired at the mo and just wondered if anyone had one laying about . any thing with a range from 3-10x50 or bigger .cheaper the better really . to be put on a 22-250 .not fussed what make as long as its cheap .

  3. Hi Gents, i am after a cheap semi auto (up to £350) for wildfowling, needs to be 3 inch chamber and was thinking Hatstand/webley or something similar.

    If anbody has got anything that they want to sell please let me know as there is cash waiting.

     

    Thanks Ben :blink:

    you found one yet ?

  4. I'll stick it in the hammer and give it a tap tomorrow. I assumed by the look of the crimp that it wouldn't come out!

     

    Andy, it arrived first thing this morning. I had meant to let you know but completely forgot. I'm seriously impressed by all the labelling of the various items and kit - far more organised than I ever manage to be! :good:

     

    I've loaded the 30 odd cases that were marked as new. I'll fire them twice and then add them to the other 50 that are marked "fired twice and cleaned". One thing I did wonder though - How come you didn't just load the whole lot?

    make sure your rifle chamber the used brass .ie check each piece. otherwise you will have to full length size each piece of used brass. otherwise your be wasting your time when reloading .and the kinetic hammer will be used more than you think .

  5. Thanks for the info. I'll give the towel trick a go and see if it works. The repair place in Chelmsford sounds very tempting but I dare say it will not be covered if it requires a further repair. If I send it off to Microsoft and it goes wrong again, it's down to them.

    In future though I'll stick with Sony.

    i had that problem once . look ok the bay starting with e and and look up xbox 360 repair x clamp kit . 9 times out of 10 its this problem . took me about 30 mins to repair .follow the instructions and you cant go wrong , its the heat sink that plays up on them . :good:

  6. for sale air arms s200 twin stock .177 model . i dont use air rifles and this rifle has been sat without any use for ages now so i thought someone else will make use of it . it was charged up many moons ago and still has plenty of charge in it , therefore the seals are all good . it comes with scope and mounts , the scope is smk 4x 40 . just one fault really some heavy handed muppet did the screw up to tight and put a crack near the screw ( in picture ) but it does not effect it , could be repaired very easily . SOLD. . post-21450-1286878064.jpgpost-21450-1286878071.jpg

  7. i see your point its just i read a lot on the 243 and some say (not my words) that for the bigger deer its not up to the job. the last thing i want is a deer on thr run with a wound from a rifle that is not the right cal

    it all depends on the feo really but i think a 308 for deer is a bit extream . (personal choice ) . you will have more of a chance of getting 243 6.5 270 and is more than sutable for deer . a correct bullet placement will bring anything down without fear of wounding . you can wound with any calibre . good luck tho and hope it works out . :hmm:

×
×
  • Create New...