rovercoupe
-
Posts
1,291 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by rovercoupe
-
-
Allways used a blue loctite and never had a issue breaking the nut when needed to undo dont know what type it is just blue!
-
Prob a few husqwarna and stiws on there
Next door bought a new stihl and he has run it for a few hours and it really needs to go back for the carb to be set right so I would hunt locally and if you know the online rate see if they will match or get close to it and try for a first year service thrown in! it will need some tuning after a bit of use so it helps to be able to have some local service.
-
I did it in 10 bar sessions, the pump gets too hot otherwise. Took ages but wanted to see if it could be done.
-
bet it was a 3lt bottle ,for a top up in the field.( an dare i say "out of test") well i use too.
Yep spot on!
-
Do you have a plug socket in the garage? if so can you not just buy a 10W pir led floodlight and wire a plug to it and mount the light on the wall. Job done and no messing with the light ring.
-
I re filled a 3l tank with a hand pump.......once!
-
Planning is exempt if its primary purpose is for use as a bomb shelter, maximum of 30m2 and over 1m from main house. I have been through this with my builder and he is a specialist in retaining walls and sub stuff and hes doing my garage which is being built on a slope so its going to have a "inspection pit" under the garage and the only way to keep it dry and safe is some serious walls and waterproofing. its mostly standard stuff with 2 block walls rebar and concrete in the middle with tar everywhere is its possible but quite involved. Stay away from containers they are too weak will rust and collapse. Also you have to think about airflow in enclosed spaces allthough if you turn up the bass enough that might work!
-
I thought I was fit until I did a days brash dragging and I could hardly move the next day!
-
I buy mine from a pet shop near my office.
Only in yorkshire! What shop is it?
-
-
You could do it the american way,
Depends what the trees are as to how they will react to being taken back. Once they are cut back they will need regular work on them say every few years to stop them bushing out too much.
-
1502 fps so quite fast, it did burn really well with clean barrels so I think it could be dropped a fair bit! I am starting to think its hard to fit a 21g load into a 24g wad so its been made with a high powder charge to stack it out.
It was tested against a few comp x, eley first select and some lyavale super light which were quite nice. Oh and a few 24g victory somethings!
-
Well I tested the 21g loads today and I have not blown my gun up and all my fingers and face are intact and they broke clays like a good un! The load kicked quite hard though so next try will be a 24g load and see how that goes. To celebrate I made another few kgs of shot.
-
Stick them in your other halfs bag.
-
Yes there is. A circular saw is mostly used for ripping/ cutting wood along the grain. A chop/mitre saw is used for cross cutting and mitering .
Chop saw = saw for cutting steel
Mitre saw = fixed to base for wood
Circular saw = good for cutting fingers off with!
You soon learn to call them the right thing when you tell the new lad to cut some wood and they use a chop saw and smoke the place out!
-
The modern sandwich ones are pretty flimsy, maby a trip to the local scrappers or building site to see if they have any bits you can have and do some tests on?
-
Worth a try, thanks anyway.
-
Do you have any left handed ones?
-
mines got 4 years until renewal so judging by the way its going I should get it in now!!
-
-
The brass/steel head is quite large on the dark storm, try them after a clean and see if they cycle. I was told that gamebore had some issues with heads over expanding but wether this was just to sell some different carts or not I do not know as not tested the new ones yet!
-
TVP used to be 20
Hampshire 8 or 9
Staffs 15 I think from memory
Additional security can be a nightmare alarms barred windows upgraded locks etc. depending on the build and location.
They were all standard features where I used to live in a more ropey area of Leeds.
-
Someone on here must have a walk in armoury?
-
Will AS be ok for 24g? got some 28g wads too but have loads of superfasts to use up so want to reload some lighter loads first.
Eley Amber Cartridges
in Clay Pigeon Shooting
Posted
I shoot a fair few just because its a 70mm cart and can reload them! they do have more of a kick than a comp x or first light but they will cycle my 1100 99% of the time as well as not being harsh in the sxs and I have had some long kills on them. I dont know if they sorted the fiber issue, had a few wonky wads but on plastic now and nothing wrong so far.