steve_k

yes it is and i have replaced the thing with two arms that moves the bolt it will fire one shot at atime it is just rather annoying having to cycle the thing manually i think i will have to take it in to the gun shop to let the pros have a look at it however professional the service may not be....! thanks guys any other help will be much appreciated SK

my remmy 1100 has stop ejecting cartridges and it doesnt seem to even try and push the bolt back anymore..... i have cleaned out the holes replaced the seal, changed the extractor claw,firing pin and nearly ever other part on it... can anyone give me any other ideas before i have to take it in to the gun shop...... sk

thanks baldrick i will have a go at that in a bit

i have just changed to CCI's and i have found that they only eject if they have been fired.... live rounds stay in the chamber, and it's rather scary to find that happens.... anyone on here had the same problem.... or have any info..... thanks SK

i can never get that website to come up i wonder if my fire wall blocks it......? thanks for that

I need a new set of piston rings for my for my remmi and I have seen some kits availible from the U.S does anyone know of a shop or website that stocks them in the U.K...? SK

i have one with plastic barrels and if i remember rightly the stock is sky blue pink! the barrel length is 46" and also comes with a 56" fibreglass barrel if you fancy a change it jams on many ocassions and i am looking for around £1k PS can any1 please you...............

i shoot a semi... cant stand using anything else... most places i shoot dont care... just a little strange, as for safety the gun is always pionting up in the air and the slip is always over my peg... so when the drive is finished it goes straight back in (after unlaoding obviously) so there really are no safety issues unless that is not the norm...? sk

i was doing the same thing last year... my tip wood be, depending on how much you trust your dog, treat them as you mean to go on, expect them to be a pro straight away... keep them on the lead while walking the line, then when the drive is over let them off the lead and go have a good sniff around... you might have a great suprise... your dog coming back with there first bird....! good luck

you have to push the off button and the menu button and hold for ten seconds

i was just wondered if there was anyone on here that owns a styer pro hunter that has had a problem when trying to load the third shot in to the chamber. and if there is has anyone managed to cure it?

avast simply the best! beats norton in to the ground!

most of the time it is cause by a burr on the faulty pin if you take it out and file the edges slightly then they should be fine

your best bet wood be to knock 1 up it aint to hard all you need a wire box a spring and some hi-tensile wire

its from the film "dont back down" just a different angle...?