bluejay22 Posted November 3, 2009 Report Share Posted November 3, 2009 I was wondering if any of you know if it`s possible to modify the stock trigger on a 77/17 HMR. The trigger i believe is set around 6lbs and although i have used it i know if it were lighter shots, especially longer range ones, would be tighter. Kits are available but can the stock trigger be made a little more user friendly? Thanks Quote Link to comment Share on other sites More sharing options...
Dougy Posted November 4, 2009 Report Share Posted November 4, 2009 You can try and allter it yourself, but i would reccomend changing it for a rifle basic. It does make allot of difference. Quote Link to comment Share on other sites More sharing options...
bluejay22 Posted November 4, 2009 Author Report Share Posted November 4, 2009 Cheers Dougy, thanks for the advice. :blink: Quote Link to comment Share on other sites More sharing options...
rimfire4969 Posted November 4, 2009 Report Share Posted November 4, 2009 A good gunsmith should be able to polish it up a bit and take off any burrs to lighten it. Quote Link to comment Share on other sites More sharing options...
Glensman Posted November 4, 2009 Report Share Posted November 4, 2009 I put a volquartsen sear in mine. Got it for about $10 but I think they're normally closer to $40... Made a great job of it. Quote Link to comment Share on other sites More sharing options...
bluejay22 Posted November 8, 2009 Author Report Share Posted November 8, 2009 Thanks for the tips. I had originally planned to get a Jard trigger but with weather, work and one thing and another never set the wheels in motion..plus it was working out about £90 and that was with a good exchange rate against the USD at that particular time. I see Midway UK have the rifle Basix unit in stock so it`s an option. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.