robmiller Posted November 25, 2009 Report Share Posted November 25, 2009 (edited) Hi Guys, have tried to p ut this in the airgunning section but for some reason it wont let me load a photo! Anyways, i have and s200 and have just managed to get a bottle. Currently have a stirrup pump. Can anyone tell me what connection i need to the bottle to allow me to gauge the pressure and attach to an s200 mk1 Thanks Edited November 25, 2009 by robmiller Quote Link to comment Share on other sites More sharing options...
jojusa Posted November 25, 2009 Report Share Posted November 25, 2009 I think it's an A clamp set up that you need. Have a look here http://www.deepblueshooting.com/department...spf-hose/430177 Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted November 25, 2009 Report Share Posted November 25, 2009 Hows this for coincidence?-im guessing you bought this from garethw-i bought the other one and i also have an s200 and i'm looking for the same parts-spooky. Quote Link to comment Share on other sites More sharing options...
robmiller Posted November 25, 2009 Author Report Share Posted November 25, 2009 Ha ha Think this is what we need mate? http://www.deepblueshooting.com/department...-1-4bspf/430175 Quote Link to comment Share on other sites More sharing options...
jojusa Posted November 25, 2009 Report Share Posted November 25, 2009 (edited) Ha haThink this is what we need mate? http://www.deepblueshooting.com/department...-1-4bspf/430175 Rob, It's the A clamp fitting you need for that bottle and not the DIN fitting. Forget what I just posted, I've had another look and now I'm confused as to what fitting you need. :blink: Edited November 25, 2009 by jojusa Quote Link to comment Share on other sites More sharing options...
Gareth W Posted November 25, 2009 Report Share Posted November 25, 2009 You can use either, the A-clamp converts to DIN simply by using an allen key to remove the centre part of the valve. HTH Quote Link to comment Share on other sites More sharing options...
killer rabbit (r1000) Posted November 26, 2009 Report Share Posted November 26, 2009 You can use either, the A-clamp converts to DIN simply by using an allen key to remove the centre part of the valve. HTH correct - i have one similar (i prefer the din-fitting - more secore under pressure) Quote Link to comment Share on other sites More sharing options...
robmiller Posted November 26, 2009 Author Report Share Posted November 26, 2009 Ok...i am confused, can anyone help me out with a link of what i need?! Rob Quote Link to comment Share on other sites More sharing options...
Gareth W Posted November 26, 2009 Report Share Posted November 26, 2009 http://www.deepblueshooting.com/department...-charging/50282 http://www.airrifleshop.co.uk/Accessories/Charging.htm Rob in those links there are A-clamp and DIN fitting charging adaptors, both of which fit that cylinder. For A-clamp leave the screwed insert in the valve (the bit with the allen key hole in it), for DIN fitting you need a allen key to remove the screwed insert, the charging adaptor then screws into the valve where the insert was. DIN is more secure at higher pressures due to it screwing into the bottle valve. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.