woodcock1 Posted October 23, 2010 Report Share Posted October 23, 2010 Does anyone know of a cartridge belt where the brass of the cartridges an covered by a flap or something similar. I find myself constantly knocking my gunstock on them leaving small dents in the wood. I all ready carry a game bag when rough shooting and dont want to use a cartridge bag also. Any Ideas? Quote Link to comment Share on other sites More sharing options...
silverhawk Posted October 23, 2010 Report Share Posted October 23, 2010 none that i know of.I just turn the belt to my left side so the front where the cartridges are face left and the back of the belt to my right,no scratches or dents since If your left handed then the other way.Another thing you could do is put your jumper over your belt but would take longer to load. Quote Link to comment Share on other sites More sharing options...
chrispti Posted October 23, 2010 Report Share Posted October 23, 2010 I just use a pocket. I do have a neoprene belt which will hold 3.5'' cartridges, so a smaller sized cartridge can be pushed down a bit so the brass is covered http://www.johnforsey.co.uk/wildfowling_ac..._cart_belt.html Quote Link to comment Share on other sites More sharing options...
soreshoulder Posted October 23, 2010 Report Share Posted October 23, 2010 is it fairly tight holding? could you wear it upside down and get the cartridges out from underneath? Quote Link to comment Share on other sites More sharing options...
2bangs Posted October 23, 2010 Report Share Posted October 23, 2010 I wear mine inside out and slightly loose so that I can still get the carts out, no contact at all with the stock, the "inside" of the neoprene one is fairly padded too for extra protection. Quote Link to comment Share on other sites More sharing options...
chrispti Posted October 23, 2010 Report Share Posted October 23, 2010 is it fairly tight holding? could you wear it upside down and get the cartridges out from underneath? Yes, possibly Quote Link to comment Share on other sites More sharing options...
woodcock1 Posted October 23, 2010 Author Report Share Posted October 23, 2010 Ive had an idea. Ive cut about 12" out of the sleve of an old wetsuit which slides over the belt. I can slide this round to where I need it. Proper job! Quote Link to comment Share on other sites More sharing options...
HDAV Posted October 23, 2010 Report Share Posted October 23, 2010 (edited) neoprene stock cover? http://cgi.ebay.co.uk/Realtree-Camo-Neopre...531fce1ffeb61e8 Edited October 23, 2010 by HDAV Quote Link to comment Share on other sites More sharing options...
Andy H Posted October 23, 2010 Report Share Posted October 23, 2010 They do make them ,But where. http://forums.pigeonwatch.co.uk/forums/sty.../attach_add.png Quote Link to comment Share on other sites More sharing options...
Vince Green Posted October 24, 2010 Report Share Posted October 24, 2010 You don't have to fill all the loops. You only need a few cartridges at a time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.