Matt Gould Posted February 2, 2012 Report Share Posted February 2, 2012 hello everybody just been out to pattern my sx3 using a 3/4 teauge extender choke and 32gram carts it seem to be shooting the pattern about 3" high is this normal or is it me Quote Link to comment Share on other sites More sharing options...
HDAV Posted February 2, 2012 Report Share Posted February 2, 2012 Is that centre of the pattern 3" higher than you aimed? At what range? Quote Link to comment Share on other sites More sharing options...
Salop Matt Posted February 2, 2012 Report Share Posted February 2, 2012 Am sure most should pattern 60% above the point me aim and 40% bellow ! Quote Link to comment Share on other sites More sharing options...
bullet boy Posted February 2, 2012 Report Share Posted February 2, 2012 What range was you shooting at Matt? Quote Link to comment Share on other sites More sharing options...
stu nesling Posted February 2, 2012 Report Share Posted February 2, 2012 3 inch is nothing to worry about, if you mean 3 foot then thats a problem. whats the range you tried Quote Link to comment Share on other sites More sharing options...
aister Posted February 2, 2012 Report Share Posted February 2, 2012 my sx3 patterns 60% high and 40% below as i think it should do Quote Link to comment Share on other sites More sharing options...
Matt Gould Posted February 2, 2012 Author Report Share Posted February 2, 2012 hi guys thanks for the replys, i was shooting at about 25 yard and no that was the botttom of the pattern, so using a 3/4 quater choke i would say to the middle of the pattern it was about 7" high maybe Quote Link to comment Share on other sites More sharing options...
HDAV Posted February 2, 2012 Report Share Posted February 2, 2012 7" above where you aimed? Quote Link to comment Share on other sites More sharing options...
Matt Gould Posted February 2, 2012 Author Report Share Posted February 2, 2012 7" above where you aimed? yes, i aimed at a dot and the pattern whent 7" high and that measuring from the dot to the middle of the pattern Quote Link to comment Share on other sites More sharing options...
EdSolomons Posted February 2, 2012 Report Share Posted February 2, 2012 That's pretty standard the centre of the pattern should be a bit higher than the bead Quote Link to comment Share on other sites More sharing options...
Cosd Posted February 2, 2012 Report Share Posted February 2, 2012 yes, i aimed at a dot and the pattern whent 7" high and that measuring from the dot to the middle of the pattern Hi Matt It could be your gun is just a tad short on the stock for you. If you have any shims add one and see if the pattern drops down from seven inches. Cos Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.