Terry P Posted October 27, 2012 Report Share Posted October 27, 2012 (edited) Just had my basc mag and theres a right up about a new cartridge from eley, its a steel load and travels at 1600fps :blink: , awesome for a factory load, its also outside cip regs, but states that cip regs are only a volantary agreement so they will not carry the cip approved logo, they are also releasing a load that will be approved by cip. Don't know how much they are but could be worth a look Edited October 27, 2012 by Terry P Quote Link to comment Share on other sites More sharing options...
TrapFiller Posted October 27, 2012 Report Share Posted October 27, 2012 What load and how many grams Quote Link to comment Share on other sites More sharing options...
Rimfireboy Posted October 27, 2012 Report Share Posted October 27, 2012 (edited) 36 grams steel 3 inch case. Edited October 27, 2012 by Rimfireboy Quote Link to comment Share on other sites More sharing options...
TrapFiller Posted October 27, 2012 Report Share Posted October 27, 2012 Cheers Quote Link to comment Share on other sites More sharing options...
Floating Chamber Posted October 27, 2012 Report Share Posted October 27, 2012 That's going to be a CSB0 load methinks. Quote Link to comment Share on other sites More sharing options...
figgy Posted October 27, 2012 Report Share Posted October 27, 2012 Just read the article in Sporting Shooter 32g 1,3,5 shot sizes at 1640 fps at 2.5 meters from the muzzle, 190 per thousand. The powder is a brand new development for steel loads from maxam according to the write up. Sounds great I will have to try some on the marsh after a pattern plate. Figgy Quote Link to comment Share on other sites More sharing options...
Floating Chamber Posted October 28, 2012 Report Share Posted October 28, 2012 Just read the article in Sporting Shooter 32g 1,3,5 shot sizes at 1640 fps at 2.5 meters from the muzzle, 190 per thousand. The powder is a brand new development for steel loads from maxam according to the write up. Sounds great I will have to try some on the marsh after a pattern plate. Figgy CSB0 Quote Link to comment Share on other sites More sharing options...
kent Posted October 28, 2012 Report Share Posted October 28, 2012 it looks interesting will have to pick up a box and test them on paper first. it will take a good shell to repace my gamebore 3" no.3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.