jam1e Posted October 29, 2012 Report Share Posted October 29, 2012 Hi folks, I'm trying to find an rfd who stocks alot of reloading equipment. I'm after a .204 Ruger neck sizing die. Along with a LEE case length gauge and shell holder. I'm trying to get one "off the shelf" rather than have one on order. Cheers. Quote Link to comment Share on other sites More sharing options...
1066 Posted October 29, 2012 Report Share Posted October 29, 2012 Henry Krank might be your first port of call. http://www.henrykrank.com/index.php?main_page=index Quote Link to comment Share on other sites More sharing options...
sixhills 69 Posted October 29, 2012 Report Share Posted October 29, 2012 Try www.midway.co.uk they will sort you out as above henry kranks you do not need an RFD to order these Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted October 29, 2012 Report Share Posted October 29, 2012 (edited) you wont get a lee case trimmer in a 204 cal they dont make them i had alot of trouble. but if you look at midway uk at hollow possum trimmer they have one that trims the 204. krank did"t have anything when i spoke to them a few months ago Edited October 29, 2012 by pestcontrol1 Quote Link to comment Share on other sites More sharing options...
baconbuttie Posted October 29, 2012 Report Share Posted October 29, 2012 Shame Lee don't list a .204 length gauge & holder ! Or a die ! Are they available as a custom only ? Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted October 29, 2012 Report Share Posted October 29, 2012 they do a shell holder and die just not a case trimmer i use lee dies for my 204 had to order them in at my local shop Quote Link to comment Share on other sites More sharing options...
jam1e Posted October 30, 2012 Author Report Share Posted October 30, 2012 If the case holder is the same as size as a .223 (size 4) then could i buy the .223 size and use a lathe to trim the diameter down. Or is it hardened metal?? Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted October 30, 2012 Report Share Posted October 30, 2012 (edited) what i did was get a lee ziptrim screewed £23 ish it to my bench and got a possum hollow case trimmer £17 ish the possum trimmer locates on the shoulders of each case and trims the the case. The trimmer can be used for more than one calliber. You just have to unscrew and set the length for 204 which is easly done. Yes the case holder is the no4 that you need Edited October 30, 2012 by pestcontrol1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.