Its all about the length

[Elmer Fudd 1]

......well it was to start with

 

i have a cz 452 varmint with a 21 inch barrel and wahlnut stock fitted with a sirocco sm11 moddy

 

this gun is way too long for the field and i would like to make a few changes to the gun its self and would like some help on the options that i should choose (tight budget)

 

i would like;

synthetic stock

16inch barrel

varmint barrel

to use my modderator

and not to have to go through the hassel of paperwork for a like for like swap on a gun

chopping the barrel is not preferable.

 

any advise is much appreciated

 

fudd

Edited December 21, 2012 by Elmer Fudd 1

[Gimlet]

Stock up on ammo, send your ticket in a for a one-off-one-on and sell it/trade it in and get the gun you want when your ticket comes back. The paperwork is less hassle and cheaper than turning a 21" walnut sporter into 16" synthetic varminter.

[Livefast123]

Easy, get the barrel chopped to 14" and screwcut which gives you a varmint profile and the ability to use a mod. You'll love the sweet handling and accuracy will be the same or better.

 

Swap the stock or just bite the bullet and buy a new synthetic one.

 

Much cheaper than a new gun and less hassle than the paperwork and you have a gun that you have made for your needs.

 

My CZ 511 with 14" chop and threaded for SAK moderator......the only thing it hasn't got is the plastic stock!

Uploaded with ImageShack.us

Edited December 21, 2012 by Livefast123

[Elmer Fudd 1]

i reckon i might go through the send off for a certificate variation and hope to get it back this side of august thanks guys for the help.

 

fudd.

 

livefast123, nice gun!

[Albert 888]

Not 100% sure but you cant get a standard synthetic stock for the varmint,it would have to be an after market one and they aint cheap, ive been looking at them for the 455.

[sixhills 69]

Phone Edgar Brothers they do them but if you know some one in the US then get one from CZusa and have a friend post it to you unfortunatly they will not ship stocks to the uk But they are only $129 works out £75 and then shipping

[Elmer Fudd 1]

if i can get over the certificate boundries then i will get either one of these

http://cz-usa.com/pr...452-silhouette/

or my other option is to go abit more extreme

http://www.rimfirema..._buildlist.html

(12.5inch factory barrel with boyds tacticool stock.at the bottom)

 

any body got anything to add im open to suggestions

or even just your opinion

Edited December 21, 2012 by Elmer Fudd 1

[Paddy Galore!]

had my buckmark shortened to 14", with a 3rd i tac mod it's still nice and stumpy for lamping in the van.

[Dekers]

......well it was to start with

 

i have a cz 452 varmint with a 21 inch barrel and wahlnut stock fitted with a sirocco sm11 moddy

 

this gun is way too long for the field and i would like to make a few changes to the gun its self and would like some help on the options that i should choose (tight budget)

 

i would like;

synthetic stock

16inch barrel

varmint barrel

to use my modderator

and not to have to go through the hassel of paperwork for a like for like swap on a gun

chopping the barrel is not preferable.

 

any advise is much appreciated

 

fudd

 

You have a tight budget, you don't want paperwork hastle and you don't want to chop the barrel?

 

CZ don't do a synthetic Varmint stock to my knowledge, so aftermarket = loads of money!

 

Buying a new rifle will mean paperwork.

 

Why on earth don't you just chop the one you have?

[Elmer Fudd 1]

i could but to me the paper work seems more resonable than the chop

that way i can get the cz 452 synthetic with a shorter barrel and if i wait 3 months for my shotgun certificate renual then i can see if i can arrange for a new slot after i sell my old rifle