Steview555 Posted May 3, 2013 Report Share Posted May 3, 2013 Hi newby to pigeon shooting. I bought some decoys and stuff form Ebay and included were two bouncers complete with the foam wings etc. When I set them up it seems the weight of the bouncer causes it to bend fully and the decoy lays on the ground, if i separate the poles it seems to be OK but I cannot see the point of having two poles if the weight is too much, I then bought a new Jack Pyke one thinking it may just be the age of the poles having to much flex in them and exactly the same thing. I put the spike in the ground then connect the poles with the angled end of the pole into the bouncer what am i doing wrong? Quote Link to comment Share on other sites More sharing options...
matone Posted May 3, 2013 Report Share Posted May 3, 2013 The angled end goes into the groundspike to allow it to pivot with the wind direction. Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted May 3, 2013 Report Share Posted May 3, 2013 It sounds like your decoys need to go on a diet! Quote Link to comment Share on other sites More sharing options...
Steview555 Posted May 3, 2013 Author Report Share Posted May 3, 2013 The angled end goes into the groundspike to allow it to pivot with the wind direction. Oops Quote Link to comment Share on other sites More sharing options...
swiss.tony Posted May 5, 2013 Report Share Posted May 5, 2013 tape the poles together i think you have the split pole 1s Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.