hedge hunter Posted August 5, 2013 Report Share Posted August 5, 2013 Hi guys im after some advise please. Iv recently just striped my old investarm 20g back to bare wood. It was in a terrible state, anyway after all the prep she was finally ready for the oil. I used a danish oil on the gun, left to dry, knocked back between coats etc, all as stated in other post. Now my question is now that its totally dried do i just leave it as is or do i need to wax it for a final finish ? Any help and advice greatly recived cheers hh Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 19, 2013 Report Share Posted August 19, 2013 I would add a few coats of Tru Oil for a good seal. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted August 19, 2013 Report Share Posted August 19, 2013 You don't need to do anything but waxing as part of your care regime will keep the stock in top condition. Please don't put tru oil on top you've taken the time to use a real oil why then add that rubbish. Quote Link to comment Share on other sites More sharing options...
gazbev Posted August 25, 2013 Report Share Posted August 25, 2013 You don't need to do anything but waxing as part of your care regime will keep the stock in top condition. Please don't put tru oil on top you've taken the time to use a real oil why then add that rubbish. Try CCI feminising kit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.