Lampwick Posted August 12, 2013 Report Share Posted August 12, 2013 I'm having problems with getting spent cartridges out of my boys 410! They dont come out without the use of a knife!!! I've given using it after half a dozen shots as I'm a bit concerned theres a problem with it? We dont use it much. The cartridges are 2 1/2 inch as is the chamber? I've given the chamber a bit of a scrub to see if it was gummed up. I can't work it out? Any ideas? Quote Link to comment Share on other sites More sharing options...
arjimlad Posted August 12, 2013 Report Share Posted August 12, 2013 Could it need attention underneath(!) Take the stock off and look at the spring which runs from the stock bolt to the trigger. Where the stock bolt goes into the nut, the nut itself is detachable & threaded. If the stock bolt nut is loose this might allow the extractor to drop so that it does not engage with the bolt when you open it ? Quote Link to comment Share on other sites More sharing options...
Longbower Posted August 12, 2013 Report Share Posted August 12, 2013 arjimlad, is spot on, I have one of these , and had extractor problems when I first got it. It was bent, and did not collect the spent cartridge as the bolt was pulled back. Good luck with it , great little gun. "Just because we are old enough to know better, doesn't mean we have to"; Quote Link to comment Share on other sites More sharing options...
Lampwick Posted August 12, 2013 Author Report Share Posted August 12, 2013 Excellent,thanks that's one for tomorrow! Back then for an update. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.