walt1980 Posted January 30, 2014 Report Share Posted January 30, 2014 Just picked one of these up and had a go with it earlier. Quick question about removing unfired carts, on my last semi you could pull the bolt back and the one in the chamber would pop out, bolt slides forward and next cart goes in, same again to remove next one etc, on this you pull the bolt back and it eject cart 1, bolt goes forward but no cart leaves mag! Have to the pull trigger with nothing in the chamber, releasing cart from magthen slide bolt back and forward to put cart in chamber then extract! Sounds wrong to me?! Anyone know different? Quote Link to comment Share on other sites More sharing options...
Dekers Posted January 30, 2014 Report Share Posted January 30, 2014 I have a 391 and perhaps I have had too much wine tonight but that is what is meant to happen...and is a simple way to empty a full tube! Quote Link to comment Share on other sites More sharing options...
SSS Posted January 30, 2014 Report Share Posted January 30, 2014 (edited) There's a little button at the front of the floor plate, press that instead of the trigger. Does the same job afaik Edited January 30, 2014 by SSS Quote Link to comment Share on other sites More sharing options...
rabbiter Posted January 30, 2014 Report Share Posted January 30, 2014 at the back of the port where you load the shells into the magazine you should see a small catch/button,press that then pull bolt back,then again till mag and breech are empty mate,let us know how you get on...........DAZ Quote Link to comment Share on other sites More sharing options...
fenboy Posted January 30, 2014 Report Share Posted January 30, 2014 Dont mess about with the little catch that just loads the next into the chamber. Press the round button that releases the bolt with the bolt closed while holding down the loading gate and it releases the cartridge from the magazine and out of the loading gate , repeat to get out the second , pull the bolt back to take the last out of the chamber Quote Link to comment Share on other sites More sharing options...
walt1980 Posted January 30, 2014 Author Report Share Posted January 30, 2014 Ahhhh will try in the morning! Cheers people!! Top guys as always!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.